Active Member
|
[China]
Address: Building 21, Shangding Enterprise Park, Yubei District, Chongqing, China
Contact name:Gelon
Chongqing Aorun Industrial Co., Ltd. |
|
|
Quick Detail:
| Name | Art resinX722 | Product Type | Epoxy AB Resin |
Mixing Ratio | 2:1 | Usage | Construction, Fiber & Garment, Footwear & Leather, Packing |
Features:
1.Can be cured at room temperature or by heat curing,
2.Can automatic antifoaming
3.Can automatic leveling
4.No bubbles
5.Good transparency and excellent surface gloss
6.Can polish after drying
7.High hardness
8.With high gloss as a mirror
| Items | Units/conditions | Technical Data |
| Viscosity | Shore-D | 80-85 |
| Volume resistivity | 25℃/ Ω./ cm | 4.3x1015 |
| Surface resistivity | 25℃/ Ω. | 2.6x1014 |
| Dielectric strength | 25℃ KV/MM | 25 |
| Coefficient of linear expansion | CM/K | <6.1x10-5 |
| Glass transition temperature | ℃ | >90 |
| Temperature resistant | ℃ | -60~120 |
MEASURING
With gloves on, pour equal amounts of resin and hardener into a mixing cup. And then pouring the mixture into another clean mixing cup to make sure you are mixing it well.
TIP - Mix up a little more than you think you'll need because you want to completely cover your work in one shot and not have to mix more later.
MIXING
Stir really well for at least 3 minutes. Scrape the sides and the bottom to make sure you're being thorough (unmixed material will leave you with sticky spots that just won't cure). Once you put the resin and hardener together, you'll have about 40 minutes of working time before the resin thickens and cures.
POURING
After making sure your piece is level, go ahead and pour AmazingResin over your work. Don't be scared! It'll start to level on its own, and you can spread it around into place. Let the resin run over the edges and then just use a brush to tidy it up. You'll notice bubbles will begin to rise to the surface. Many of these will pop on their own, but you can also pop them by torch.
TIP - Wooden panels work best for large pieces rather than canvas because they won't sag under the weight of the resin.
WAIT AmazingResin needs to sit for several hours in a dust-free space while it cures. In about 8 hours it will be tacky but you will be able to pour a second coat if necessary. In about 12 hours it will be dry to the touch, and within 24 hours it will be 95% cured. It will be fully cured within 72 hours.CLEAN UP - To reuse your mixing tools, wipe them down with a paper towel before the resin dries.
How to Choose Product Model:
Aorun epoxy resin is suitable for machinery, petrochemical,
vehicle, electronic products, electrical equipment, construction,
decoration, special purpose and other industries, especially for
special purpose and multiple purposes.
