CE Programmable Touch Screen Temperature and Humidity Test Chamber
for Battery Test
Model | BT-E702-150 |
Internal dimension (W*D*H) | 500*500*600mm |
External dimension (W*D*H) | 700*1080*1480mm |
Temperature range | -40~+150℃ (can be customized) |
Temperature fluctuation | ±0.5℃ |
Temperature uniformity | 2℃ |
Humidity range | 20~98%RH (Refer Image below) |
Humidity fluctuation | ±2.5%RH |
Humidity uniformity | 3%RH |
Cooling speed | 1℃/min in average (without loading) |
Heating speed | 3℃/min in average (without loading) |
Internal chamber material | SUS#304 stainless steel, mirror finished |
External chamber material | Stainless steel |
Cooling method | Air cooling |
Controller | LCD touch screen, programmable control temperature and humidity Can set different parameter for cyclic test |
Insulation material | 50mm high density rigid Polyurethane foam |
Heater | Explosion-proof type SUS#304 stainless steel fins radiator pipe
heater |
Compressor | France Tecumseh compressor |
Lighting | Heat resistance |
Temperature sensor | PT-100 dry and wet bulb sensor |
Observation window | Tempered glass |
Testing hole | Diameter 50mm, for cable routing |
Sample tray | SUS#304 stainless steel, 2pcs |
Safety protection device | Protection for leakage Over-temperature Compressor overvoltage and overload Heater short circuit Water shortage |
Function
1. To simulate test environment with different temperature and
humidity
2. Cyclic test includes climatic conditions: holding test,
cooling-off test, heating-up test, moistening test and drying test…
3. Cable port with flexible silicone plug for cable routing to
provide the condition of test unit under operation
4. Uncover test unit weakness in a short-term test with accelerated
time effect
Design Features
1. High performance and quiet operation (68 dBA)
2. Space-saving designed for flush installation to wall
3. Full thermal break around doorframe
4. One 50mm diameter cable port o left, with flexible silicone plug
5. Accurate wet/dry-bulb humidity measurement system for easy
maintain
Programmable Controller
1. PLC controller for test chamber
2. Step types include: ramp, soak, jump, auto-start, and end
3. RS-232 interface to connect computer for output
Company introduction
BOTO GROUP Ltd. is a private enterprise integrating r&d,
production, OEM and sales of scientific and technological equipment
manufacturing. Proficient in the production, development and
upgrading of various non-standard instruments and automatic
instruments.
The factory covers an area of 26,666 square meters, headquartered
in Shanghai, has several offices in China, the factory annual
output of about 2000 sets of equipment. Since the establishment of
the company, the company is committed to providing customers with
quality products and services, and has been praised by customers.
In the domestic market, we have many end customers, third-party
testing institutions, research institutes, leading enterprises in
different industries, and some agents. For the overseas market, we
hope to find more general agents, distributors and importers to
cooperate together.
The factory has the ability to calibrate, and the customer can also
designate a third party organization to calibrate and issue a
calibration report.
We're looking for agents, if you have any intererst, you can send
email to us to know more.