Home Companies BOTO GROUP LTD

Cyclic Corrosion Testing

Contact Us

[China]

Trade Verify

Address: Room 2304, Fortune Plaza, No. 5616 Caoan Road, Anting Town, Jiading District, Shanghai

Contact name:Sherry Zhang

BOTO GROUP LTD

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

Cyclic Corrosion Testing

Country/Region	china
City & Province	shanghai shanghai
Categories	Solar Chargers

Product Details

Salt Spray Test Machine, Salt Spray Test Equipment, Salt Spray Test Chamber

Product description

This chamber is mainly used for Salt spray test (NSS,ACSS), Anti-corrosion test (CASS) and so on.

Product Parameters

Model	BT-RT-311A	BT-RT-311B	BT-RT-311C
Inside box size(cm)	60x45x40	90x60x50	120x80x50
Outside box size(cm)	107x60x118	141x88x128	190x110x140
Testing rooom temperature	Salt test (NSS ACSS)35℃±1℃/ Corrosion Test (CASS)50℃±1℃
Pressure barrel temperature	Salt test (NSS ACSS)47℃±1℃/ Corrosion Test (CASS)63℃±1℃
Brine temperature	35℃±1℃ 50℃±1℃
Testing room capacity	108L	270L	480L
Brine tank capacity	15L	25L	40L
Salt concentration	The concentration of sodium chloride 5% or the 5% concentration of sodium chloride add 0.26g per liter of copper chloride (CuCl2 2H2O)
Air pressure	1.00±0.01kgf/cm2
Spray volume	1.0~2.0ml/80cm2/h (working at least 16 hours, then take the average)
Testing room relative humidity	85% above
PH	6.5~7.2 3.0~3.2
Spray form	Programmable spray (Including continuous and intermittent spray)
Power	AC220V1Φ10A	AC220V1Φ15A	AC220V1Φ20A

Model	RT-311A	RT-311B	RT-311C
Inside box size(cm)	60x45x40	90x60x50	120x80x50
Outside box size(cm)	107x60x118	141x88x128	190x110x140
Testing rooom temperature	Salt test (NSS ACSS)35℃±1℃/ Corrosion Test (CASS)50℃±1℃
Pressure barrel temperature	Salt test (NSS ACSS)47℃±1℃/ Corrosion Test (CASS)63℃±1℃
Brine temperature	35℃±1℃ 50℃±1℃
Testing room capacity	108L	270L	480L
Brine tank capacity	15L	25L	40L
Salt concentration	The concentration of sodium chloride 5% or the 5% concentration of sodium chloride add 0.26g per liter of copper chloride (CuCl2 2H2O)
Air pressure	1.00±0.01kgf/cm2
Spray volume	1.0~2.0ml/80cm2/h (working at least 16 hours, then take the average)
Testing room relative humidity	85% above
PH	6.5~7.2 3.0~3.2
Spray form	Programmable spray (Including continuous and intermittent spray)
Power	AC220V1Φ10A	AC220V1Φ15A	AC220V1Φ20A

Corresponding Standard :

1. GB/T 2423.17-1993 salt spray test

2. GB/T 2423.18-2000 salt spray test

3. GB/T 10125-1997 salt spray test

4. ASTM.B117-97 salt spray test

5. JIS H8502 salt spray test

6. IEC68-2-11 salt spray test

7. IEC68-2-52 1996 salt spray test

8. GB.10587-89 salt spray test

9. CNS.4158 salt spray test

10. CNS.4159 CASS Accelerated acetic acid copper salt spray test

11. GB/T 12967.3-91 CASS Accelerated acetic acid copper salt spray test

Product Advantages

1. Spray method: A: continuous spray B: programmable spray.

2. Adopt a full detection system, which can be lighted when a fault
occurs.

3. The whole set is made of imported PVC board, the structure is
strong, never deformed, and it is resistant to acid and alkali and high temperature and never
aging.

4. Adopt automatic/manual water adding system, with the function of
automatic/manual water adding when the water level is insufficient, the test will not be
interrupted, and the water level will be alarmed when the water level is insufficient.

5. Quartz glass nozzle, the mist diffuses evenly, and falls naturally
on the test piece without blocking by crystalline salt.

6. The controllers are all on the same board, easy to operate and
clear at a glance.

7. With double over-temperature protection, warning of insufficient
water level to ensure safe use.

8. The imported temperature controller has manual and fully automatic
control methods, using digital display, PID control, error ± 0.1 ℃, the maximum setting
time can reach 999HrS.

9. The laboratory adopts direct steam heating method, the heating
speed is fast and uniform, and the standby time is shortened.

10. The spray tower is equipped with a conical diffuser, which has the
functions of guiding the mist, adjusting the amount of mist and evenly falling the mist.

11. The pressure barrel adopts Henry's law to heat and humidify.

12. The upper cover of the test tank is automatically opened and closed
by a pneumatic cylinder, which is easy to operate and has good safety.

13. After the test is completed, it has an automatic defogging device
to clearly observe the test products in the test room.

Why Choose Us

Hot Products

Climate Hot Cold Thermal Humidity Calibration Test Chamber SUS304 Stainless Steel Electronic SD Card 3 Years

Portable Climate Hot Cold Thermal Humidity Calibration Test Chamber Product Description Description ...

Growth Medical Aging Equipment Environmental Temperature Humidity Climate Test Chamber

Growth Medical Aging Equipment Environmental Temperature Humidity Climate Test Chamber Production ...

Salt Spray Fog Corrosion Testing Equipment Test Chamber Iso

Salt Spray fog Corrosion Testing Equipment test chamber iso Product Description Salt Spray fog ...

Cyclic Corrosion Testing

Salt Spray Test Machine, Salt Spray Test Equipment, Salt Spray Test Chamber Product description This ...

Xenon UV Weathering Test Chamber

Xenon UV Weathering Test Chamber Product introduction ♦ user-friendly design Unique design mirror ...

Popular Good Quality Standard SHBY-60B Constant Temperature Humidity Curing Box Cabinet Test Chamber

Popular Good quality Standard SHBY-60B Constant Temperature Humidity Curing box Cabinet test chamber ...

Related Products