|
[China]
Trade Verify
Address: Room 2304, Fortune Plaza, No. 5616 Caoan Road, Anting Town, Jiading District, Shanghai
Contact name:Sherry Zhang
BOTO GROUP LTD |
|
Verified Suppliers
|
|
|
BOTO ADVANTAGE
NSS salt spray test machine adapted to the surface treatment of various materials, including paint, electroplating, organic and inorganic coating, anode processing, antirust oil and so on, after these anti-corrosive treatment to test the corrosion resistance of their products.
USES
Thismachine has a standardized test method to check corrosion resistence of coated samples. Salt spray test
is an accelerated corrosion test that produces a corrosive attack to the coated samples in order to predict its
suitability in use as a protective finish. The appearance of corrosion products (oxides) is evaluated after a
period of time. Test duration depends on the corrosion resistance of the coating; the more corrosion resistant
the coating is, the longer the period in testing without showing signs of corrosion. Different coatings have
different behaviour in salt spray test and consequently, test duration will differ from one type of coating to
another.
Bo Nute principle draw salt water and then spray , atomization uniform , no crystallization of the blocking phenomenon , to ensure continuous testing , the compressed air nozzle on the way through it leading to the bubble column was wet , the corrosion solution and air nozzle atomized into a corrosive mist , inside the heater to maintain the temperature inside .
Technical parameters
| Model | BT-BND-60 | BT-BND-90 | BT-BND-120 | |||||
| Inner chamber size (W*H*D) | 600*400*450 | 900*500*600 | 1200*500*1000 | |||||
| Exterior chamber size(W*H*D) | 1250*1050*910 | 1550*1210*1060 | 1900*1400*1300 | |||||
| Temp Range | Inside Chamber | Room temp.~50℃, ±0.5℃ | ||||||
| Air | Room temp.~63℃, ±0.5℃ | |||||||
| Salt water | Room temp.~50℃, ±0.5℃ | |||||||
| Saturated Air Pressure(kg/m) | 0.8 ~ 2.0 | |||||||
| Spray Volume(m/80cm/hr) | 0.5 ~ 3.0 | |||||||
| PH | Salt | 6.5 ~ 7.2 | ||||||
| Copper acetate | 3.0 ~ 3.2 | |||||||
| Exter./Inner. Mterial | P.V.C & P.P | |||||||
| Syatem | Salt Spray Veicle | Air+acid(base)liquid | ||||||
| Heating | SUS#304 &316 stainless steel heater + taflon | |||||||
| Controller | Hydrometer,salinomerer,fog collector,glassbar | |||||||
| Other Components | Digital electronic control+S.S.SR | |||||||
| Power supply | AC1220V10%50/60Hz | |||||||
| Safety Devices | Overheating prevention circult-breaker,dehydration and Overheating prevention mechanism,breakdown indicator light | |||||||
Specifications:
| Model | BT-bnd-200 Salt Spray Testing Machine |
| Inner Box Size (L×W×H) | 200×120×60 cm |
| Outside Box Size(L×W×H) | 270×150×150 cm |
| Equipment Material | Both inside & outside shell adopt imported P.V.C rigid plastic board, and tank cover uses imported transparent P.V.C. rigid plastic board |
| Temperature Range | 35°C~55°C |
| Temperature Fluctuations | ≤±0.5°C |
| Temperature Uniformity | ≤±2°C |
| Temperature Precision | ±1°C |
Test Chamber Temperature | Salt Spray Method (NSS ACSS)35±1°C Corrosion-resistant Testing Method(CASS)50±1°C |
| Saturated air Barrel Temperature | Salt Spray Method (NSS ACSS)47±1°C Corrosion-resistant Testing Method(CASS)63±1°C |
| Brine Temperature | 35°C±1°C |
| Spray Quantity | 1.0~2.0 ml / 80cm2 / hr |
| PH | Salt Spray Method (NSS ACSS6.5~7.2) Corrosion-resistant Testing Method(CASS)3.0~3.2 |
| Lab Volume | 1440L |
| Brine Tank Capacity | 40L |
| Power | AC220V,30A |
| Multiple Safety Protection Devices | Current discharge protection, over pressure protection,over temperature protection, over load fuse protection |
| Accessories | Testing Salt/ Measuring tank/ Equipment each 1 set |
| Standard | CNS: 3627, 3385, 4159, 7669, 8886; JIS: D0201, H8502, H8610, K5400, Z2371; ISO: 3768, 3769, 3770; ASTM: 8117, B268 |
Company Profile
BOTO GROUP is a professional manufacturer of various kinds of testing equipment over 20 years. BOTO products are widely used in paper products, packaging, ink printing, adhesive tapes, bags, footwear, leather products, environment, toys, baby products, hardware, electronic products, plastic products, rubber products and other industries, and applicable to all scientific research units, quality inspection institutions and academic fields.
BOTO deals with customers from more than 150 countries and regions.
Meanwhile, we are committed to cooperate with different dealers in
different countries and regions in order to offer better service.
Our mission is to help every customers establish testing labs to
ensure the quality of their products.
Our company will continue to develop, innovate and keep faith. We
combine with the international testing standards and the specific
demands of customers that may establish a new banner in Chinese
testing industry.
Main market
Production Process
The factory has the ability to calibrate, and the customer can also designate a ISO 17025 accredited third-party organization to calibrate and issue a calibration report.
Factory Inspection
We control quality from the materials, electronic parts,
controller,comppressor, solenoid valve, and many parts of the
products.
Main equipment
Certification
The certificate is valid until June 17, 2024
Cooperative partners
FAQ
1. How can we guarantee quality?
Continuous testing is performed after production is completed to
ensure product stability.
All parts come from manufacturers of world-renowned brands.
