|
[China]
Trade Verify
Address: Room 2304, Fortune Plaza, No. 5616 Caoan Road, Anting Town, Jiading District, Shanghai
Contact name:Sherry Zhang
BOTO GROUP LTD |
|
Verified Suppliers
|
|
|
Introduction:
Temperature humidity test chamber is used to test various types of materials for their tolerances of heat, cold, dry, humidity. It is applied for quality inspection for all types of electronic products, electric appliance, and products from battery, communication, instrument, automobile, plastic, metal, food, chemical, building materials, medical and aerospace industries.
Temperature and humidity testing help to determine the behavior of the components in severe test conditions and environments that involve fluctuating environment, high temperature, and different relative humidity. The tests can be done with constant temperature and humidity in a static state and can bedone in a dynamic state where the moisture is used to induce a failure of the components or materials.
Features:
1. Available in Chinese and English LCD touch screen, easy
operation and program.
2. Able to display the relative date and information of the whole
operating system in running mode, graphic display, precautions,
maintenance and troubleshooting appear on the screen instantly.
3. Temperature humidity Test chamber The Sirocco fan motor provides
greater cyclic airflow to avoid dead corner in the chamber so as to
obtain an uniform distribution of temperature and humidity.
4. The system of heating up, heating down, dehumidifying, and
humidifying can be operated independently so as to reduce the cost
of testing, extend the operation life of the machine and decrease
the failure rate.
5. Water supply adopts automatic watering system, circulating water
supply together with water filter
Application:
Table type constant temperature and humidity test box box using CNC machine processing molding, beautiful and elegant, novel and adopt no reaction handle, easy to operate.
The inner chamber is made of imported advanced stainless steel (SUS304) mirror plate or 304B argon arc welding, and the outer chamber is sprayed with A3 steel plate. Microcomputer temperature and humidity controller, temperature and humidity control accurate and reliable.
Large observation window with lights to keep the box bright, and the use of double glass, clear observation box at any time. An independent temperature limit alarm system is set, which automatically interrupts when the temperature exceeds the limit, ensuring the safe operation of the experiment without accidents.
Standard Compliance:
This product meets the requirements of GB/T2423.1-2001 GB/T2423.3-1993 GB/T2423.2-2001 and other national standards, as well as other relevant standards.
Features:
1. Small size, special design and overlapping, not occupying planar space, suitable for laboratory use.
2. Low power consumption, energy saving and consumption reduction; low noise, low radiation, green environmental protection.
3. High efficiency, communication mode using Qualcomm software F4 controller to complete a variety of tests at the same time.
4. Both sides are equipped with side tests. Holes, easy to operate.
5. Multiple safety protection, refrigerant high voltage protection, compressor overload protection, current overload protection, overtemperature protection, leakage protection.
Product specification:
| Name | Small high and low temperature test chamber | Table type constant temperature and humidity test chamber | ||||
| Model | Dry Heat | B-T-107(A-D) | B-T-48L (A~D) | |||
| Damp and Hot | B-TH-48L (A-D) | |||||
| Internal Dim | 30.5x23x29 | 40x40x30 | ||||
| External Dim(W*H*D) | 53x68x72 | 60x80x107 | ||||
| Relative Humidity | ‘-40℃(-60℃)-130℃(100℃) (A:0℃ B:-20℃ C:-40℃ D:-60℃) | ’7.081- -60℃~150℃(100℃) (A:0℃ B:-20℃ C:-40℃ D:-60℃ | ||||
| Relative humidity Range | 20%~98%RH | |||||
| Heat-up time | About3℃/min | |||||
| Pull down time | About0.7~1℃/min | |||||
| Temp Fluctudtiont | ±0.5℃ | |||||
| Temp Uniformity | ±1.0℃ | |||||
| Temp Deviation | ±1.0℃ | |||||
| Power Source | AV:220V/380V 50/60Hz | |||||
| Power(KW) | 1KW~2KW | 1.5KW~2.5KW | ||||
About us:
Certifications:
Packing:
Fully packed with PE film;
Wooden box;
Machine is fastened to the corners of the containers;
If export to European countries, the wooden box will be fumigated;
Customized package is available.
Shipping:
FAQ:
Q1:When can I get the quote?
A1:We usually quote within 48 hours after we get your inquiry.
Q2:Can you do the design for us?
A2:We can specially customize according to your technical requests.
Q3:What is your terms of delivery?
A3:We accept FCA, CFR, CIF, etc. You can choose the one which is the
most convenient or cost effective for you.
Q4:what about the after-sale service?
A4:A years warranty and lifetime free technical support.
Q5:Can we visit your factory?
A5:Yes,of course.Welcome to China to visit our factory.
