Plastic Shopping Basket Making Energy Saving Injection Molding Machine Full Automatic

The small machine is integral and does not need to be disassembled and assembled. When lifting, the adjusting mode should be adjusted to the minimum die thickness.

The disassembly and assembly of the machine will be completed by the large crew of the injection machine manufacturer.

If the machine moves again in the workshop and there is no crane, the bottom of the machine needs to be padded with rolling wood.

Because the machine is heavy, it should be directed by a crane worker with lifting experience. Attention should be paid to the following items:

(1) Use powerful hoists and conveyors to lift machines (including cranes, hoisting equipment, hooks, wire ropes, etc.).

(2) If any hanging wire rope is in contact with the machine, cloth or wood blocks should be placed between the wire rope and the machine to avoid damaging the machine parts, such as the pull rod of the injection molding machine.

(3) Pay attention to the stability and level of the machine when it is lifted.

(4) The wooden block pads or pads can not be removed until all the unloading and handling of the machine have been completed.