Home Companies Pacific Electric Wire & Cable (Shenzhen) Co., Ltd.

0.10mm-3.2mm PEW Overcoat Polyamide-imide SAI Grade two Thermal Class 155℃ For general motor

Contact Us

[China]

Trade Verify

Address: No.9 Jin Long 4 Road Bao long Industrail Estate Longgang,Shenzhen, China

Contact name:Gong

Pacific Electric Wire & Cable (Shenzhen) Co., Ltd.

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

0.10mm-3.2mm PEW Overcoat Polyamide-imide SAI Grade two Thermal Class 155℃ For general motor

Country/Region	china
City & Province	shenzhen
Categories	Travel Products

Product Details

Medical Equipment: In medical equipment, enameled wire SAI is used to connect various sensors, actuators and controllers to ensure the accuracy and reliability of the equipment.

Aerospace: In the aerospace field, enameled wire SAI is used to connect various sensors, actuators and controllers to ensure the normal operation of aircraft.

New Energy: In the field of new energy vehicles and solar power generation, enameled wire SAI is used to connect batteries, motors and other key components to realize the efficient conversion and utilization of energy.

Good flexibility and abrasion resistance: The insulation layer of SAI has been specially treated to provide high flexibility and abrasion resistance. This facilitates the molding and assembly process of motor stator windings.

Excellent radiation resistance: SAI's silicone insulating layer can effectively block a variety of electromagnetic radiation, in some of the strict requirements of electromagnetic compatibility is very suitable for the occasion.

In short, as a high-performance wire material, enameled wire SAI is widely used in various electronic and electrical equipment, providing important support for the development of modern science and technology.

GB ---Grade2 Unit﹕mm
Diameter of Conduct	Conductor Tolerance	Conductor Control Benchmarks		OD Control Benchmarks		Specification Boundaries		Conductor Resistance 20℃ (Ω/KM)	Min Elongation (%)	Max. Springiness (°)	Insulation breakdown voltage (v)
Diameter of Conduct	Conductor Tolerance	Lower Limit	Upper Limit	Lower Limit	Upper Limit	Min. Increase in Diameter	Max. Finished overall Diameter	Conductor Resistance 20℃ (Ω/KM)	Min Elongation (%)	Max. Springiness (°)	Insulation breakdown voltage (v)
0.040	±0.002	0.039	0.041	0.049	0.053	0.008	0.054	15202	9		475
0.045	±0.003	0.044	0.046	0.056	0.060	0.010	0.061	12445	9		550
0.050	±0.003	0.049	0.051	0.061	0.065	0.010	0.066	9938	10		600
0.056	±0.003	0.055	0.057	0.067	0.071	0.010	0.074	7815	10		650
0.063	±0.003	0.062	0.064	0.076	0.081	0.012	0.083	6098	12		700
0.071	±0.003	0.070	0.072	0.084	0.089	0.012	0.091	4747	13		700
0.080	±0.003	0.079	0.081	0.095	0.100	0.014	0.101	3703	14	80	850
0.090	±0.003	0.089	0.091	0.106	0.111	0.015	0.113	2900	15	77	900
0.100	±0.003	0.099	0.101	0.117	0.122	0.016	0.125	2333	16	73	950
0.112	±0.003	0.111	0.114	0.130	0.136	0.017	0.139	1848	17	73	2700
0.125	±0.003	0.124	0.127	0.145	0.151	0.019	0.154	1475	17	70	2800
0.140	±0.003	0.139	0.142	0.162	0.168	0.021	0.171	1170	18	67	3000
0.160	±0.003	0.159	0.162	0.184	0.190	0.023	0.194	890.6	19	67	3200
0.180	±0.003	0.179	0.182	0.207	0.213	0.025	0.217	700.7	20	65	3300
0.200	±0.003	0.199	0.202	0.229	0.235	0.027	0.239	565.7	21	62	3500
0.224	±0.003	0.223	0.226	0.255	0.262	0.029	0.266	449.5	21	59	3700
0.250	±0.004	0.249	0.253	0.285	0.292	0.032	0.297	362.8	22	56	3900
0.280	±0.004	0.279	0.283	0.316	0.323	0.033	0.329	288.2	22	53	4000
0.315	±0.004	0.314	0.317	0.353	0.361	0.035	0.367	227.0	23	55	4100
0.355	±0.004	0.354	0.357	0.396	0.404	0.038	0.411	178.2	23	53	4300
0.400	±0.005	0.398	0.403	0.444	0.454	0.040	0.459	140.7	24	50	4400
0.450	±0.005	0.448	0.453	0.496	0.506	0.042	0.513	110.9	25	48	4400
0.500	±0.005	0.498	0.503	0.549	0.559	0.045	0.566	89.59	25	47	4600
0.560	±0.006	0.557	0.563	0.611	0.621	0.047	0.630	71.53	26	44	4600
0.630	±0.006	0.627	0.633	0.684	0.696	0.050	0.704	56.38	27	50	4800
0.710	±0.007	0.707	0.714	0.768	0.780	0.053	0.789	44.42	28	47	4800
0.800	±0.008	0.797	0.804	0.861	0.873	0.056	0.884	35.00	28	43	4900
0.900	±0.009	0.897	0.904	0.965	0.977	0.060	0.989	27.65	29	48	5000
1.000	±0.010	0.997	1.004	1.068	1.082	0.063	1.094	22.40	30	45	5000
1.120	±0.011	1.116	1.124	1.190	1.204	0.065	1.217	17.85	30	41	5000
1.250	±0.013	1.246	1.254	1.322	1.336	0.067	1.349	14.35	31	37	5000
1.400	±0.014	1.396	1.406	1.476	1.490	0.069	1.502	11.43	32	34	5000
1.600	±0.016	1.596	1.606	1.678	1.694	0.071	1.706	8.75	32	30	5000
1.800	±0.018	1.796	1.806	1.880	1.896	0.073	1.909	6.91	32		5000
2.000	±0.020	1.994	2.006	2.082	2.098	0.075	2.112	5.60	33		5000
2.240	±0.022	2.234	2.246	2.324	2.342	0.077	2.355	4.46	33		5000
2.500	±0.025	2.494	2.506	2.586	2.604	0.079	2.618	3.58	33		5000
2.800	±0.028	2.794	2.808	2.890	2.908	0.081	2.922	2.86	34		2500
3.150	±0.032	3.144	3.158	3.243	3.263	0.084	3.276	2.26	34		2500

Hot Products

HAI Grade one Overcoat Polyamide-Inmide Enameled Copper Winding Wire Thermal Class 180℃

Contact Us

Pacific Electric Wire & Cable (Shenzhen) Co., Ltd.

0.10mm-3.2mm PEW Overcoat Polyamide-imide SAI Grade two Thermal Class 155℃ For general motor

Product Details

Hot Products

HAI Grade one Overcoat Polyamide-Inmide Enameled Copper Winding Wire Thermal Class 180℃

0.10mm-3.2mm PEW Overcoat Polyamide-imide SAI U2 Thermal Class 155℃ For general motor

0.10mm-3.2mm PEW Overcoat Polyamide-imide SAI Single Thermal Class 155℃ For general motor

0.10mm-3.2mm PEW Overcoat Polyamide-imide SAI Heavy Thermal Class 155℃ For general motor

0.10mm-3.2mm PEW Overcoat Polyamide-imide SAI Grade two Thermal Class 155℃ For general motor

0.10mm-3.2mm PEW Overcoat Polyamide-imide SAI Grade three Thermal Class 155℃ For general motor