Results foren 143 pfe testerfrom 865 Products.
|
|
Automatic Electronic Product Tester, Abrupt Pull Tester Power Wire / Headphone Cable Model: RS-8112A Purpose: This machine is suitable for abrupt pull test on power wire and ...
|
|
|
|
|
UV Light Testing Equipment Purpose: UV Lamp tester adopt fluorescent lamp simulating the UV spectrum of sun shine, combined with temperature control, humidity system. It can ...
|
|
|
|
|
ASTM D2794 Plastic Testing Equipments Pendulum Impact Tester 1000mm Hight Model: RS-8223A / RS-8223B Application: This machine is applicable to impulse test of material test block ...
|
|
|
|
|
Bi-Directional Fabric Air Permeability Test Equipment ASTM D737 Professional Model: IN-3013 Purpose: Digital air permeability tester is a professional instrument testing air ...
|
|
|
|
|
Plastic / PVC Pendulum Impact Tester Reliability Test ASTM / ISO / GB Model: RS-8223B Application: Put the coated specimen under the impact end, check the damage or warping after ...
|
|
|
|
|
Cutter Press Tester for Cutting The Standard Specimen for The Testing Model:RS-802 Application: This machine is for cutting the standard specimen for the testing, it should be used ...
|
|
|
|
|
UL498-Figure 173.2 Wall mounting secureness tester Products Introduction The test device is used for wall mounting secureness test as per UL498 figure 143.2. It is used to check ...
|
|
|
|
|
GB 6675.2 / EN 71-1 Toy Bicycle Dynamic Strength & 2 m/s Tester To Test Dynamic Strength Of Wheeled Ride-On Toys Application: 1. The dynamic strength test of children's bicycles, ...
|
|
|
|
|
Toy Safety Sharp Edge Test Equipment/Tester, Sharp Edge Test Device Product introduction Sharp Edge Tester Sharp Edge Tester used to determine that metal or glass edges on toys and ...
|
|
|
|
|
EN 14543:2005+A1:2007 (E) Clause 7.2.2.2 Figure 1 Test Cone Protecting Against Accidental Contact With The Burner EN 14543:2005+A1:2007 (E) Specification for dedicated liquefied ...
|
|
|
|
|
Battery Nail Penetrating Tester Product Type: KP-6055-B Product Description: Remote shortcircuiter with high current is designed for standards of diversified bettery short circuit ...
|
|
|
|
|
EN ISO 5356-1:2015 Anaesthetic and respiratory equipment — Conical connectors Test equipment Check compliance by engaging the cone or socket in the appropriate plug or ring test ...
|
|
|
|
|
IEC 60320-1-1 C5 connector -maximum withdrawal forces of gauge Appliance couplers Standards sheet C5, Connector 2.5 A / 250 V for class II equipment for cold conditions (non...
|
|
|
|
|
Application: KINGPO Sourcing offers a wide range of gauge to meet the most common standards including those from IEC, EN, UL, GB,DIN,VDE and others. Such standards require the ...
|
|
|
|
|
Glass Four-point Bending Tester Usage This tester is applicable to analysis and research of static physical performance test on phone glass,tablet computer glass,liquid crystal ...
|
|
|
|
|
Wall Mounting Secureness Tester HF-02 Products Introduction The test device is used for wall mounting secureness test as per UL498 figure 143.2. It is used to check when the socket ...
|
|
|
|
|
High Current Arc Ignition Tester HAI-1 Products Introduction This device conforms to standard requirements of UL 746A, UL746C, UL 498 clause 114, IEC 60950-1, BS EN 60950-1, BS ...
|
|
|
|
|
IEC60335-2-5 Dishwasher Internal Wiring PLC Control Single Station Flexible Tester With Load Voltage Adjustable Product information The tester is designed and manufactured ...
|
|
|
|
|
BS EN IEC 60950 Flammability Testing Equipment , High Current Arcing Ignition Tester Product information: The high current arcing igintion tester is used to measure and assess the ...
|
|
|
You may also be interested in :
