|
[China]
Trade Verify
Address: Room 1901, Renxin Building, Renxinhui Plaza , Hanyang District Wuhan, Hubei, China
Contact name:henry
Wuhan Linmei Head Plate Co., Ltd. |
|
Verified Suppliers
|
|
|
As the name suggests, the elliptical head is elliptical, so it can also be called an elliptical head. It is widely used in various low-pressure vessels and has a very significant effect.
Characteristics of elliptical heads:
1. For example, if the pipeline has reached the top and is no longer ready to extend, a head can be welded to the pipe as the end to continue using.
2. Used in pressure vessels, with a head on both sides and a straight pipe in the middle, it can be used as a container for pressure vessels.
3. The mechanical performance of elliptical heads is very good, even better than dished heads, only slightly worse than hemispherical heads. Due to the different depths of elliptical heads compared to other types of heads, there are high requirements for grinding equipment. In terms of manufacturing difficulty, elliptical heads are more difficult to manufacture than dished heads, but much easier than hemispherical heads.
| Brand Name: | GLM |
| Diameter: | 89mm--10000mm |
| Thickness: | 2mm--300mm |
| Reduction Ratio: | about 10% |
| Material: | Carbon Steel, Stainless Steel, Duplex, Super Duplex, Aluminum, Nickel and Nickel Alloys, Copper and Copper Alloys, Titanium and Its Alloys, Zirconium and all cladded material combinations. |
| Forming method: | Hot forming,cold forming |
| Surface Treatment: | Sand Blasting,Pickling,oil,discaling |
| Inspection: | UT,RT,MT,PT,TOFD. |
| Applicable Standard: | ASME ,PED and GB |
| Certificate: | ISO9001,ISO45001,OHSAS18001 |
| Applications: | Such as oil, chemical industry, water conservancy, electric power, boiler, machinery, metallurgy, sanitary construction etc. |
| Package: | Wooden cases ,wooden pallet,Steel pallet or as per customers requirement |
| Customized Product: | Available |
1. What’s the information should I provide when inquiry?
Thanks for your question. If you have drawings, we will be entirely in accordance with production drawings . If you do not have the drawing, you can tell me the product data. There are several important data, such as material, type of head( We have elliptical head, hemispherical head, dished head, flat head, etc. ),diameter, thickness, special tolerances or requirements. We can do the drawings according to your requirements, and you confirm that the final product drawings.
2. what are surface treatment of the product?
Thanks for your question. For carbon steel products, we sandblasting descaling product surface. For stainless steel products, we use acid to remove surface oil and impurities.
3. How do you ensure the quality of products?
Thanks for your question.Our production staff is trained through national quality department, and obtain the corresponding certificate, with years of production and design experience. Weld must undergo X-ray inspection to ensure that no defects.
4. Can you help us matching related products?
Thanks for your question. Our company also is surrounded by a lot of ancillary businesses, such as flanges, boiler, oil refining equipment, etc. We can help you matching the highest quality products with the lowest prices.
