BC7033A Chargers
1 . BC7033A smart charger is designed for diesel engine starting
battery designed to run charging device .
2 . After the end of the battery voltage is higher than the preset
value ; charging according to battery charging features designed
charging mode is " constant current transformer type", ie before
the end of the battery voltage is lower than the preset value, the
charging of the constant current charging , the charging current
increases with the battery voltage is gradually decreased. Until it
reaches the threshold voltage of the battery , charging into a
trickle charge , the battery charging current can only be offset by
self-discharge , and also a long time to charge the battery
harmless , that the charger can maintain a full battery charge
status while ensuring battery life.
3 . Switching power supply with power factor control circuit , so
that the charger has a wide operating voltage, higher efficiency
than the conventional charger and a finer size.
4 . Suitable for 12V and 24V battery , through panel switch
selection.
5. Charger has strengthened charging mode selection .
6. Perfect protection : high and low voltage battery , overcurrent
, overheating and open circuit protection .
7 . Installation : You can use screws or DIN35 rail mounting ( for
non- vibration environments ) .
Connect the charger plugged in, after turning on the power to start
charging. Before the end of the battery voltage falls below a
preset value , the charge for the constant current charging ; After
the end of the battery voltage is higher than the preset value ,
the charging current with the battery voltage rises gradually
reduced. Until the threshold voltage of the battery , charging into
the trickle charge .
POWER LED: AC power input is normal , the indicator light . ALARM
indicator : When the charging failure , low failure, high
temperature protection, the indicator light (ALARM valid ) .