AVR for Generator Alternator EA16A

EA16A Voltage Regulator:

• Voltage Regulation < ±0.5%
• Suitable for brushless type generator Sensing Input 170~510 VAC
• Can be used in Parallel Operation
• 16 ADC Current Output
• EA16 Suitable Frequency 50/60 Hz
  Soft Start Voltage Ramping
• Load CT Current Compensation, Analogue Voltage Input

  Sensing Input	Voltage 170~510 VAC single phase 2 wire
  	Frequency 50/60 Hz
  Power Input	Voltage 60~300 VAC single phase 2 wire
  Output	Voltage Max. 90 VDC @ 240 VAC input Current Continuous 16A, Max. Intermittent 20A for 10 sec. Resistance Min. 6 Ohm @ 35 VDC
  Voltage Regulation	< ±0.5% (with 4% engine governing)
  Voltage Build-up	Residual volts at AVR terminal > 5 VAC
  External Volts Adjustment	±5% with 2 K Ohm 1 watt trimmer
  Unit Power Dissipation	Max. 10 watt
  Thermal Drift	0.03% per °C change in AVR ambient
  Under Frequency Protection	55 Hz @ 60 Hz / 45 Hz @ 55 Hz (Adjustable)
  CT Current Compensation Input	1A or 5A (Selectable)
  Analogue Input	±5 VDC ±10% AC @ ±3 VDC
  Environment	Operating Temperature : -40~70 °C Storage Temperature : -40~85 °C Relative Humidity : Maximum 95% Vibration : 3.3G @ 100~2 KHz
  AVR Controls Functions	VOLT : Voltage Adjustment STAB : Stability Adjustment U/F*: To Set the U/F Knee Point DROOP : To Adjust Droop TRIM : Analogue Input Adjustment (*U/F: Under Frequency Protection)
  Dimensions	156.0 (L) x 106.0 (W) x 43.0 (H) mm
  Weight	450g ±2%

   

The following are our products: