Active Member
|
[China]
Address: CRANE INDUSTRAL PAPK CHANGYUAN
Contact name:Alisa
HENAN KONE CRANES CO.,LTD |
|
|
2 Ton Mini Hoist Manual Single Girder Overhead Crane
Technical characteristics:
The limiting size is the lowest between the top of crab and the track of trolley, that is to say, it reduces 20%-30% compared with traditional products, which can reduce the capacity of workshop 20% efficiency. It has hard-tooth reducer, imported wire-rope, and trinity drive. It is equipped with such protecting devices as alarm device to overloading, obliquely hanging second protecting equipment preventing hook clashing the top, protecting the current lacking of any phrase etc. The operating board (handle) adopts 12v safe voltage to fulfill multifunction of protection to overheadhoist. The electric controlling can be used more than 2 million times when the voltage is 380v+5~-10%.
| LX Type Electric Single-girder Underslung Crane 5t | |||||||||
| Span | S(m) | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 |
| Lifting height | m | 9 | 9 | 9 | 9 | 9 | 9 | 9 | 9 |
| Lifting speed | m/min | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 |
| Trolley speed | m/min | 20 | 20 | 20 | 20 | 20 | 20 | 20 | 20 |
| Crane speed | m/min | 20 | 20 | 20 | 20 | 20 | 20 | 20 | 20 |
| Lifting motor | kw | 7.5 | 7.5 | 7.5 | 7.5 | 7.5 | 7.5 | 7.5 | 7.5 |
| Trolley motor | kw | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 |
| Total weight | t | 1.28 | 1.36 | 1.44 | 1.52 | 1.60 | 1.92 | 2.02 | 2.12 |
| Max wheel load | t | 2.92 | 2.94 | 2.96 | 2.99 | 3.01 | 3.10 | 3.12 | 3.15 |
| Track | I36a | I36a | I36a | I36a | I36a | I36a | I36a | I36a | |
| Main dimension | mm | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 |
| Girder edge to hook | h | 1320 | 1320 | 1320 | 1320 | 1320 | 1320 | 1320 | 1320 |
| Wheel base | W | 1000 | 1000 | 1000 | 1000 | 1000 | 1500 | 1500 | 1500 |
| Crane width | B | 1500 | 1500 | 1500 | 1500 | 1500 | 2000 | 2000 | 2000 |
| Hook left limitation | S1 | 302 | 302 | 302 | 302 | 302 | 302 | 302 | 302 |
| Hook right limitation | S2 | 170 | 170 | 170 | 170 | 170 | 170 | 170 | 170 |
| Left cantilever | L1 | 750 | 750 | 750 | 750 | 750 | 1000 | 1000 | 1000 |
| Right cantilever | L2 | 750 | 750 | 750 | 750 | 750 | 1000 | 1000 | 1000 |
| Note: Control mode for ground operation | |||||||||
FAQ
1. What is an overhead crane inspection?
Periodic (Annual) Overhead Crane & Hoist Inspection. The
Periodic (Annual) Overhead Crane and Hoist Inspection is a detailed
visual and operational inspection. Individual components are
examined to determine their condition. The Periodic Inspection is
performed Annually, Semi-Annually and perhaps even Quarterly based
on severity of service.
2. Why do you need an overhead crane?
Moving bulky loads on floors or through aisles requires a lot of
time and can result in injuries. However, overhead cranes play a
key role in this because they easily allow warehouse owners in
lifting, lowering and moving loads horizontally.
3. What is the role of the grab bridge bucket crane?
Usually, the grab bucket crane is located at the top of the garbage
storing pit and is mainly used for the operation of feeding,
conveying, mixing, fetching, and weighing of garbage. The garbage
grab crane manufactured by the crane factory can implement lifting
and convey strictly to ensure normal work of garbage cremation
power point.
