HENAN KONE CRANES CO.,LTD |
5ton overhead crane Workshop Lifting Crane
Technical characteristics:
The limiting size is the lowest between the top of crab and the
track of trolley, that is to say, it reduces 20%-30% compared with
traditional products, which can reduce the capacity of workshop 20%
efficiency. It has hard-tooth reducer, imported wire-rope, and
trinity drive. It is equipped with such protecting devices as alarm
device to overloading, obliquely hanging second protecting
equipment preventing hook clashing the top, protecting the current
lacking of any phrase etc. The operating board (handle) adopts 12v
safe voltage to fulfill multifunction of protection to
overheadhoist. The electric controlling can be used more than 2
million times when the voltage is 380v+5~-10%.
Points to attention:
1. Users should lock the crane in time, when the crane stops
operating on operating spot.
2. There is no electric wire above the total switch of the crane.
Strictly forbid to use in such dangerous operating as easily
combustible, explosive, corrosive, overloading, dust, etc.
Single girder, welded box beams, the camber line is according to
national standard.
High safety, high steel degree.
Adopts high quality carbon steel, Q235B or Q345B.
The main weld is by submerged arc welding automatic welding,
nondestructive flaw detection.
The end truck adopts 10.9 high strength bolt connection.
The crane traveling mechanism adopts separated driving, and it can
use trinity drive too, safe and reliable.
End beam equipped with buffer block, orbital cleaning device.
LX Type Electric Single-girder Underslung Crane 5t | |||||||||
Span | S(m) | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 |
Lifting height | m | 9 | 9 | 9 | 9 | 9 | 9 | 9 | 9 |
Lifting speed | m/min | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 |
Trolley speed | m/min | 20 | 20 | 20 | 20 | 20 | 20 | 20 | 20 |
Crane speed | m/min | 20 | 20 | 20 | 20 | 20 | 20 | 20 | 20 |
Lifting motor | kw | 7.5 | 7.5 | 7.5 | 7.5 | 7.5 | 7.5 | 7.5 | 7.5 |
Trolley motor | kw | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 |
Total weight | t | 1.28 | 1.36 | 1.44 | 1.52 | 1.60 | 1.92 | 2.02 | 2.12 |
Max wheel load | t | 2.92 | 2.94 | 2.96 | 2.99 | 3.01 | 3.10 | 3.12 | 3.15 |
Track | I36a | I36a | I36a | I36a | I36a | I36a | I36a | I36a | |
Main dimension | mm | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 |
Girder edge to hook | h | 1320 | 1320 | 1320 | 1320 | 1320 | 1320 | 1320 | 1320 |
Wheel base | W | 1000 | 1000 | 1000 | 1000 | 1000 | 1500 | 1500 | 1500 |
Crane width | B | 1500 | 1500 | 1500 | 1500 | 1500 | 2000 | 2000 | 2000 |
Hook left limitation | S1 | 302 | 302 | 302 | 302 | 302 | 302 | 302 | 302 |
Hook right limitation | S2 | 170 | 170 | 170 | 170 | 170 | 170 | 170 | 170 |
Left cantilever | L1 | 750 | 750 | 750 | 750 | 750 | 1000 | 1000 | 1000 |
Right cantilever | L2 | 750 | 750 | 750 | 750 | 750 | 1000 | 1000 | 1000 |
Note: Control mode for ground operation |