Fuan Zhongzhi Pump Co., Ltd. |
Verified Suppliers
|
|
Hollow Shaft Electric Motor Description
100L1-4 hollow shaft electric motors are designed to allow direct connection with plunger pumps
Made of high-quality materials with internal joints, hollow metal tubes, full copper coils, fully enclosed, air-cooled squirrel-cage asynchronous A.C. motors.
Under the condition of equal load, the hollow shaft design with
reasonable wall thickness can save a lot of material.
The hollow shaft design significantly reduces component quality and better achieves weight reduction goals.
Good performance, low noise, slight vibration, safe and reliable
operation, beautiful appearance, small volume, lightweight, simple
structure, and convenient maintenance.
With a wide range of applications, it is an ideal choice for cleaning equipment.
Mode: 100L1-4 Horsepower:3
RPM:1400 Shaft Size:24mm Hollow
Voltage: 400V Hertz: 60
Motor housing: Aluminum Bearing: C&U
Shaft: C#45 Insulation: Class F
Protection: IP55 Installation: B3 Hollow shaft 24mm
Stator&Rotor: 1. Cold-rolled silicon steel sheet by high-speed punching machine. 2.100% high-quality copper wire
Advantage:
1. High-quality materials, low power loss, low current, low-temperature rise, good heat dissipation, high efficiency, and energy-saving.
2, high-quality bearings, rigorous process, low noise operation.
3. Tailored for professional equipment, the shaft extension is
subjected to high-frequency quenching treatment, significantly
improving mechanical strength and seamlessly connecting with the
equipment to realize worry-free operation.
Main Specification | Standard Optional |
Motor housing | Aluminum |
Stator&Rotor | 1. Cold-rolled silicon steel sheet by high-speed punching machine. 2.100% high-quality copper wire |
bearing | C & U |
Shaft | C#45 |
Insulation | Class F |
Protection | IP55 |
Voltage | 220/380V Three Phase |
Frequency | 60HZ |
thermal protection | Yes |
Installation | B3 Hollow shaft 24mm |
Hollow Shaft Electric Motor Application
Hollow shaft asynchronous motors are designed for pressure washer pumps and are designed for various high-pressure washer applications.
Production line
Production data
Three-Phase 4 Poles 1500Rpm 50Hz | |||||||
FRAME | POWER | RPM | COSφ | EFF.% | VOLT | AMPERE | |
KW | H.P. | P.F. | V | A | |||
711-4 | 0.25 | 0.35 | 1370 | 0.73 | 64 | 400 | 0.8 |
712-4 | 0.37 | 0.5 | 1350 | 0.74 | 68 | 400 | 1.1 |
713-4 | 0.55 | 0.75 | 1350 | 0.75 | 66 | 400 | 1.6 |
90L1-4 | 1.5 | 2 | 1400 | 0.82 | 78 | 400 | 3.4 |
90L2-4 | 2.2 | 3 | 1400 | 0.79 | 77 | 400 | 5.4 |
90L3-4 | 2.6 | 3.5 | 1400 | 0.80 | 78 | 400 | 7.4 |
100L1-4 | 2.2 | 3 | 1400 | 0.80 | 81 | 400 | 5.1 |
100L2-4 | 3 | 4 | 1410 | 0.80 | 81 | 400 | 6.9 |
100L3-4 | 4 | 5.5 | 1420 | 0.80 | 82 | 400 | 9.4 |
100M1-4 | 4.4 | 6 | 1420 | 0.82 | 83 | 400 | 10 |
112M1-4 | 4 | 5.5 | 1420 | 0.80 | 83 | 400 | 9 |
112M2-4 | 5.5 | 7.5 | 1430 | 0.82 | 84 | 400 | 12.1 |
112M3-4 | 6.2 | 8.5 | 1425 | 0.82 | 84 | 400 | 13.5 |
112L-4 | 7 | 9.5 | 1430 | 0.80 | 85 | 400 | 13.8 |
132S1-4 | 5.5 | 7.5 | 1430 | 0.82 | 84 | 400 | 11.7 |
132S2-4 | 7.5 | 10 | 1430 | 0.84 | 84 | 400 | 15.4 |
132M1-4 | 9.2 | 12.5 | 1430 | 0.90 | 85 | 400 | 17.8 |
132M2-4 | 11 | 15 | 1430 | 0.90 | 87 | 400 | 21.3 |
132M3-4 | 12.5 | 17 | 1430 | 0.88 | 84 | 400 | 26 |
160M1-4 | 15 | 20 | 1450 | 0.86 | 89 | 400 | 29 |
160M2-4 | 18.5 | 25 | 1450 | 0.86 | 90 | 400 | 34 |
Guarantee:
Guarantee for one year from shipped on board date. During the
guarantee period, our company will provide free easy-damaged spare
parts for problems caused by our quality of production or raw
material, except the damageable spare parts caused by the
customer's incorrect artificial operation. In addition, after
expiration, our company provides cost spare parts for maintenance.
Our service:
1. Directly factory sale
2. Quick response to 2-8hours, response rates over 92%
3. 24 hours phone call is available. Feel free to contact us.
4. All goods produced by ourselves, we provide one-stop services
from designing, printing to processing. Customers can provide the
design according to your request and sample making. Also, we can
advise how to make the products according to customers' target
prices.
FAQ:
1. Q: What's the MOQ?
A: We accept one piece.
2. Q: Are you a factory or trading company?
A: We are a manufacturer.
3. Q: Can you accept using our logo?
A: Yes, we can do OEM for you.
4. Q: What's the warranty period?
A: 1 year.
5. Q: What are the terms of payment?
A: T/T. 30% deposit and 70% against the B.L. copy or
100% L.C. at sight.