Active Member
|
[China]
Address: 12-3, No.6, Keyuan 1st Road, Jiulongpo District, Chongqing, China
Contact name:Sen
Chongqing Shanyan Crane Machinery Co., Ltd. |
|
|
Customized Capacity and Lifting Height Wire Rope Electric Winch Hoist for Lifting
General Introduction
CD,MD Electric Wire rope Hoist is a small-sized lifting equipment,
which can be mounted on single beam bridge crane and single beam
gantry crane and jib crane. With Light weight, small size, compact
structure, stable operation, etc. It can also be used as a winch.
It is widely used in factories, mines, harbours, warehouses, cargo
storage areas and shops, essential in raising working efficiency
and improving working conditions. CD Electric Wire rope Hoist has
only one normal speed, which can satisfy normal application. MD
Electric Wire rope Hoist provides two speeds: normal speed and low
speed. At a low speed,it can do precise loading and unloading,
mounding of sand box, maintenance of machine tools, etc.
Specifications
Technical datasheet
| Model | Lifting Capacity (t) | Lifting Height (m) | Lifting Speed (m/min) | Running Speed (m/min) | Wire Rope Type | Dia.of Wire Rope (mm) | I Beam Track Type | Working Duty | Lifting Motor | ||
| Power(kw) | R.P.M ( r/min) | Power Supply | |||||||||
| CD1-0.25 | 0.25 | 3-9 | 8 | 20 | 6*19 | 3.6 | 16-22b | M3 | 0.4 | 1380 | 220-440V 50/60HZ 3Phase |
| CD1-0.5 | 0.5 | 6-12 | 8 | 20 | 6*37+1 | 4.8 | 16-28b | M3 | 0.8 | 1380 | |
| CD1-1 | 1 | 6-30 | 8 | 20 | 6*37+1 | 7.4 | 16-28b | M3 | 1.5 | 1380 | |
| CD1-2 | 2 | 6-30 | 8 | 20 | 6*37+1 | 11 | 20a-32c | M3 | 3 | 1380 | |
| CD1-3 | 3 | 6-30 | 8 | 20 | 6*37+1 | 13 | 20a-32c | M3 | 4.5 | 1380 | |
| CD1-5 | 5 | 6-30 | 8 | 20 | 6*37+1 | 15 | 25a-63c | M3 | 7.5 | 1380 | |
| CD1-10 | 10 | 6-30 | 7 | 20 | 6*37+1 | 15 | 25a-63c | M3 | 13 | 1400 | |
| CD1-16 | 16 | 6-30 | 3.5 | 20 | 6*37+1 | 15 | 45a-63c | M2 | 13 | 1400 | |
| CD1-20 | 20 | 6-30 | 3.5 | 20 | 6*37+1 | 20 | 50a-63c | M2 | 13 | 1400 | |
> Motor: Hoist Motor is a taper type rotor motor with braking; it is one of
the best quality motors, which has bigg er torque, so it can be
adapted to moving frequently, the Maximum torque is 2.4-3 times
than the rated torque.
> Gear Box: Hoist Gear Box has specially treated gears for high wear
resistance. Each Geared Shaft assembly is supported on ball or
roller bearings, to ensure smooth, low-friction operation.
> Wire Rope: Hoisting ropes comply with the exporting standards. The leading
rope taken by the drum does not slip sideways when slack. The
factor of safety, on the nominal breaking strength of the rope is
six.
> Rope Drum: Grooved hoist Drum, seamless pipe of adequate length to be wounded
in one layer and to provid eproper
support for the rope to minimize abrasive wear is provided. Drum
Shaft resolves on Ball Bearings for ensuring smooth running.
> Electric apparatus controlling system: Model CD1 and MD1 hoist is composed of the contactor box,
controlling switch, cut-off limiter, the working voltage of
controlling switch is 380V, 36V or 24V(safety voltage).
> Rope Guide: Rope Guide is in two halves, ensuring easy accessibility. It
encircles the drum completely so that the rope may not uncoil even
when the Hoist is in unloaded condition. The rope guides of our
company is thicken and dilated, so that it is not easy to be
damaged.
> Hook: The Hook Block is tested to 150 % of full load before assembly.
Notes
A. The standard lifting height is 6, 9, 12, 18, 24, 30 and 36
meters.
Factory show
