Active Member
|
[China]
Address: 12-3, No.6, Keyuan 1st Road, Jiulongpo District, Chongqing, China
Contact name:Sen
Chongqing Shanyan Crane Machinery Co., Ltd. |
|
|
I. Profile
1.1, Pneumatic hoist is the most optimum lifting device in the
world. It has been widely used in industrially developed countries,
for it takes the following advantages over motor hoists.
First, the pneumatic hoist cannot generate electric spark, so it
completely solves the anti-explosive problem.
Explosion-proof grade: Ⅰ Hazardous area, including ⅡC, Group T5 and
below.
Second, the pneumatic hoist uses the 100% work system, so as to
make the required conditions for high-efficient continuous jobs.
Third, the pneumatic hoist sees a fast operating speed which is 2-3
times more than the motor hoist, and the former can present non
polar variable speed.
Fourth, the pneumatic hoist features endurance on acid, alkaline,
steam and high-powder dust.
Fifth, the pneumatic hoist has small size and easily operation. It
is only 1/3~1/8 of the weight of a motor hoist whose specification
is same.
1.2, Based on the abovementioned characteristics, the pneumatic
hoist is widely used in the areas of petroleum, chemical industry,
coal, textile, machinery production, ship and aship and ammunition.
2. Parameter:
2.1, Inlet diameter (Hoist): Φ12, Φ 16, Φ22, Φ25, Φ32
2.2, Inlet diameter (Trolley):Φ8, Φ10, Φ12, Φ13, Φ16
2.3, Hose diameter based on the capacity and travelling length
2.4, Parameter table:
| Model | Capacity (t) | Lifting Height(m) | Max Lifting Speed (m/min) | Max Lowering Speed (m/min) | Working Pressure MPa | Air Consumption M3/min |
| QDH 0.1D | 0.1 | 0-20 | 9 | 12 | 0.6 | 0.8 |
| QDH 0.2S | 0.2 | 5 | 10 | 0.8 | ||
| QDH 0.25D | 0.25 | 10 | 14 | 1 | ||
| QDH 0.5S | 0.5 | 5 | 7 | 1 | ||
| QDH 0.5D | 0.5 | 7.5 | 12 | 1.2 | ||
| QDH 1.0S | 1 | 4 | 7 | 1.2 | ||
| QDH 1.0D | 1 | 4.8 | 8 | 1.4 | ||
| QDH 2.0S | 2 | 2.4 | 4 | 1.4 | ||
| QDH 2.5D | 2.5 | 1.8 | 3.5 | 1.8 | ||
| QDH 3.0S | 3 | 1.7 | 3.5 | 2.2 | ||
| QDH 3.0D | 3 | 1.7 | 2.7 | 1.6 | ||
| QDH 5.0S | 5 | 0.75 | 1.5 | 2.5 | ||
| QDH 6.0S | 6 | 0.75 | 1.3 | 2.5 | ||
| QDH 5.0D | 5 | 1.6 | 2.5 | 3.4 | ||
| QDH 6.0D | 6 | 1.4 | 2.7 | 3.4 | ||
| QDH 10.0-4D | 10 | 0.35 | 0.8 | 2.9 | ||
| QDH 10.0S | 10 | 0.8 | 1.25 | 3.4 | ||
| QDH 12.5S | 12.5 | 0.7 | 1.35 | 3.4 | ||
| QDH 10.0D | 10 | 1.2 | 2.1 | 4.7 | ||
| QDH 12.5D | 12.5 | 1 | 2 | 4.7 | ||
| QDH 16.0-3D | 16 | 0.5 | 1 | 3.4 | ||
| QDH 20.0S | 20 | 0.6 | 1.2 | 4.7 | ||
| QDH 25.0-4D | 25 | 0.35 | 0.7 | 3.4 | ||
| QDH 25.0S | 25 | 0.5 | 1 | 4.7 | ||
| QDH 32.0-3D | 32 | 0.4 | 0.9 | 3.4 | ||
| QDH 50.0-4D | 50 | 0.25 | 0.5 | 4.7 |
3. Photo:
OEM & ODM are both ok, welcomes contact us.
