Active Member
|
[China]
Address: Building B-3, Liando U Valley, No. 780 Baoyuan Road, Chengyang High-tech District, Qingdao, China
Contact name:
Qingdao AIP Intelligent Instrument Co., Ltd |
|
|
BLDC Motor Load Test Equipment For Production Line
| AC Hipot: apply AC high voltage between the Vm, GND, Vcc, Vsp, FG and the casing, and check the current value of the test loop | |
| Output voltage setting range/precision | AC 200～3000V ±(3%×setting value+5 words) |
| Breakdown current measuring range/precision | 0.10～20.00mA ±(3%×display value+5 words) |
| Breakdown current presetting alarm range | Max:0.10～20.00mA；Min:0.00～5.00mA |
| Test time range/resolution | 1～300s 1s/step |
| Arc detection | 1～9 level(level 9 is the most sensitive) |
| Insulation resistance:apply DC high voltage between the Vm, GND, Vcc, Vsp, FG and the casing, and check the insulation resistance of the test loop. | |
| Output voltage setting range and precision | DC 500V/1000V ±(3%×setting value+3V) |
| Insulation resistance measuring range and precision | 1～500MΩ ≤100MΩ:±(5%×display value+3 words) >100MΩ:±(8%×display value+8 words) |
| Insulation resistance setting range/precision | Max:0～500MΩ；Min:1～500MΩ |
| Test time range/resolution | 1～300s 1s/step |
| Load:check the voltage, current, power and RPM when the motor is applied load by the servo motor. | |
| Voltage measuring range/precision | Vm:DC 20.0～350.0V ±(0.5%×display value+1 word) |
| Current measuring range/precision | Im:0.010～2.000A |
| Power measuring range | 10.0～700.0W |
| RPM measuring range | Read from servo motor(within 3000rpm) |
| Load setting range | 0.20～0.75Nm |
| Rotation | CW, CCW and still |
| Vsp power output range/precision | DC 1.00～18.00V ±(0.5%×setting value+1 word) |
| Vcc power output range/precision | DC 1.00～18.00V ±(0.5%×setting value+1 word) |
| Icc current range | 1.0-100.0mA ±(1%×display value+2 words) |
| FG voltage level | High: 3.0-18.0V DC Low:3.0-18.0V DC ±(1%×display value+1 words) |
| FG frequency | 1.0-999.9Hz |
| FG duty cycle | 1.0-99.9% |
| FG waveform display | Yes |
| Power sequence chart | Power on sequence:Vcc-Vm-Vsp,Power off sequence:Vsp-Vm-Vcc, the time can be set. |
