|
[China]
Trade Verify
Address: No. 317, Yichun South Road ( Happiness Park), Yuanzhou District, Yichun, Jiangxi, 336000, China
Contact name:Penny Peng
Pego Electronics (Yi Chun) Company Limited |
|
Verified Suppliers
|
|
|
1. Introduction of ball impact test apparatus
The ball impact test apparatus is designed according to IEC62196-1 clause 26.2 figure 18 and table 13. It is applied to do the drop impact test for the accessories of the ev socket-outlet and vehicle inlet. The device can perform vertical free fall impact and horizontal pendulum impact, it has the features of easy operation and high accuracy.
Swinging or dropping a 50.8mm diameter steel sphere, weighing 0.535kg to the sample, from a height (H), which will produce an impact like 1J, 2J, 3J or 4J. The sample being tested shall be rigidly supported and the impact made normal to sample by means of the ball impact test apparatus.
2. Specification of ball impact test apparatus
| Impact steel ball | Φ50.8mm, 535±25g |
| Fall height | 0.5-1.5m |
| Up and down mode | power-driven |
| Clamping release way | power control |
Table 13 - Impact energy for ball impact test
Rating A | Energy J | |
| Vehicle Inlets | EV socket-outlets | |
Up to and including 32 Above 32 and up to and including 100 Above 100 and up to and including 150 Above 150 and up to and invluding 800 | 1 2 3 4 | 1 2 3 4 |
3. Figures:
4. FAQ
1) What kind of steel ball used for the ball impact test apparatus?
Answer: The ball is with 50.8mm diameter and 535g weight.
2) Will the apparatus come with the calibration certificate?
Answer: Yes, all of our test machines can deliveried with third-lab calibration certificates, but the cost is charged alone.
