|
[China]
Trade Verify
Address: No. 317, Yichun South Road ( Happiness Park), Yuanzhou District, Yichun, Jiangxi, 336000, China
Contact name:Penny Peng
Pego Electronics (Yi Chun) Company Limited |
|
Verified Suppliers
|
|
|
IEC60695-11-5 Needle Flame Tester for electronic Appliance with CNAS Certificate
1. Introduction
Needle flame tester is designed according to IEC60695-11-5(IEC60695-2-2). It is applicable to ignition hazard test, combustibility test of electronic industry and home electronic appliance. The equipment specifies a needle-flame test to simulate the effect of a small flame which may result from fault conditions, in order to assess product and material’s ignition risk and fire retardance by a simulation technique the fire.
The Needle Flame Tester consists of a dia.0.9mm needle burner that tilts to 45 degree from the vertical and is fueled with butane gas. The fire hazard of the specimen is assessed by measuring the burning duration of the specimen, and any ignition of the wrapping tissue and white pine board below the specimen.
The shell and important parts of the equipment are made by stainless steel, sculpt daintily, endure smoke corrupt, high automatism, high reliability of key parts of apparatus, numeric shows. Fixture could be adjusted. Test procedure could be controlled automatically.
2. Specification
| Burner | Φ 0.5mm ± 0.1mm, outer dia.: ≤Φ 0.9mm Length: 35mm, made by stainless steel. |
| Burner angle | 450 or 900 |
| Application time | 0-999.9s±0.1s adjustable (normally 30s) |
| Burning duration | 0-999.9s±0.1s auto record, manual pause |
| Flame height | 12mm ± 1mm (with height gauge) |
| Burn gas | 95% butane gas |
| Temperature range | 0-10000C |
| Flame requirement | rising time from 100℃±2℃ to 700℃±3℃ should within 23.5s±1s |
| Thermocouple | Φ0.5mm K type thermocouple |
| Experimental background | black background |
| Test period | auto control |
| Standard | IEC60695-11-5 (IEC60695-2-2), GB/T51669.5, GB4706.1 |
| Working dimension | 0.5CBM, made by stainless steel |
| Equipment size | 1000mm(W)*650mm(D)*1300mm (H) |
| Power supply | AC220±10%, 50Hz, 0.3KVA |
