Home Companies Pego Electronics (Yi Chun) Company Limited

Torque Plug Socket Tester Different Adaptors For Direct Plug - In Equipment

Pego Electronics (Yi Chun) Company Limited

Contact Us

[China] country

Trade Verify

Address: No. 317, Yichun South Road ( Happiness Park), Yuanzhou District, Yichun, Jiangxi, 336000, China

Contact name:Penny Peng

Inquir Now

Pego Electronics (Yi Chun) Company Limited

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

Torque Plug Socket Tester Different Adaptors For Direct Plug - In Equipment

Country/Region china
City & Province yichun jiangxi
InquireNow

Product Details

Torque Tester Apparatus for Direct Plug-In Equipment with Different Adaptors According to IEC60065

 

1. Introduction

The torque tester apparatus is designed according to IEC60065, it is a test to check various elements that are connected to sockets. A device provided with pins intended to be introduced into fixed socket-outlets shall not impose undue strain on these socket-outlets.

Compliance is checked by engaging the device, as during intended use, with the socket-outlet of a test apparatus as shown in figure 11. The balancing arm of the test apparatus pivots about a horizontal axis through the centre lines of the contact tubes of the socket-outlet at a distance of 8 mm behind the engagement face of the socket-outlet.
With the device not in engagement, the balancing arm is in equilibrium, the engagement face of the socket-outlet being in the vertical position.
After the device has been engaged, the torque to be applied to the socket-outlet to maintain its engagement face in the vertical plane is determined by the position of a weight on the
balancing arm.

The torque shall not exceed 0,25 Nm.

 

2. Parameters

Materialsteel
Distance8 mm behind the engagement face of the socket-outlet
Weighs

2.5N

1N

Adapters

all-purpose plug for GB and BS plugs

UL plug

AS/NZS plug

According toIEC 60065, IRAM 4229

 

IEC60065 Figure 11

 

Hot Products

Temperature Rise Black Test Corner with 136 measurement Points (IEC60335-1 / Clause 11) 1. ...
AC and DC Dielectric Withstand Tester 5KV / 10KV / 20KV / 50KV with CE Certificatet Introduction: ...
IEC60950 IEC60335-1 Scratch Tester with Hardened Steel Pin for Accessible Parts 1. Introduction ...
IEC60112 Tracking Index Tester with NH4CI Solutions for Proof Tracking Index and Comparative ...
IEC60335-1 IEC60065 Automatic Inclined Plane Device 0~45 Degrees tilted for Household Appliance 1. ...
IEC60695-11-5 Needle Flame Tester for electronic Appliance with CNAS Certificate 1. Introduction ...