Modular Structure Elbow Cold Forming Machine 3 - 30mm Wall Thickness

Suitable for the production of seamless 273mm diameter and welding elbow forming cold bending machine

1. Product Presentation

It includes a rack, a work table, a side work table, an oil press, a fuel tank, an electrical box and a control panel, as well as a forming die, a die lifter and a stripper.The frame is a whole frame structure.The hydraulic press includes a vertical hydraulic press arranged vertically between the columns and a horizontal hydraulic press arranged horizontally between the middle sections of the columns.The motor of the oil press is arranged in the upper part of the machine.In the upper part of the machine set up a large flow of low-pressure pump connected to the vertical pressure cylinder, so that the cylinder rapid movement.The electrical box and control board control the operation of the machine through a computer microcomputer.The utility model reduces noise and the arrangement of each component is more compact and reasonable. Cold push elbow machine itself belongs to the non-standard products, so there is no specific specifications and models, we can directly customize the cold push elbow machine according to customer requirements.Elbow diameter from 25mm-630mm, wall thickness is 3mm-30mm we can do.The main characteristic of cold push elbow machine is low cost.Each pipe fitting enterprise needs to purchase cold push elbow machine or elbow machine, which needs to be customized in advance. It will take 15~25 days for our company to make this equipment, and elbow machine should be prepared for booking in advance.

2. Product Parameter