SHEAN (CANGZHOU) CORP LTD |
|
Hydraulic Induction Hot Pipe Bending Machine With Plc System
Mechanical Design:
Solidworks And FEA Software design .
Control System:
SIEMENS PLC HMI SCADA.
Hydraulic System:
Solidworks
Induction Heating System
IGBT or SCR.
7×24 Hours After Service
Bends size | outer diameter Φ25mm(1″)~Φ1420mm(56″) |
Wall thickness | 5~120mm |
Bent diameter | ≤3 |
Bent degree | 22.5°,45°,90°,135° etc. |
Hydraulic cylinder | 2/4sets |
Machine composition
1. machine base/frame |
2. Main cylinder and supporting plate |
3. pushing plate |
4. front supporting plate |
5. loading table |
6. induction coils and adjusting device |
7. medium frequency power supply |
8. electrical control system |
9. auxiliary equipment: hydraulic machine/ stamping moulds/pipe end cutting machine/quality testing machine |
Main features of Hydraulic Induction Hot Pipe Bending Machine With Plc System
1. It is constructed with srtong metal fram with good appearance
and stable functioning
2. It has individual power construction and electrical system,
adopts two kinds of heating methods, high frequency and
intermediate frequency, the speed of pushing could be randomly
adjusted, the speed of adding raw material pipes is fast and the
machine is easy to operate.
Max size | Model | Heating power | Cylinder capacity | Thickness |
6” | HYG-159 | 200KW | IDΦ140 ODΦ168 | 5-20 |
8” | HYG-219 | 200KW | IDΦ140 ODΦ168 | 5-20 |
12” | HYG-325 | 250KW | IDΦ180 ODΦ219 | 5-20 |
16” | HYG-426 | 350KW | IDΦ180 ODΦ219 | 5-20 |
20” | HYG-530 | 400KW | IDΦ180 ODΦ219 | 5-20 |
24” | HYG-630 | 500KW | IDΦ200 ODΦ245 | 5-20 |
28” | HYG-720 | 600KW | IDΦ200 ODΦ245 | 5-20 |
32” | HYG-813 | 800KW | IDΦ220 ODΦ273 | 5-20 |
36” | HYG-914 | 800KW | IDΦ250 ODΦ299 | 5-20 |
48” | HYG-1220 | 1000KW | IDΦ280 ODΦ325 | 5-20 |
56” | HYG-1420 | 1000KW | IDΦ280 ODΦ325 | 5-20 |
60” | HYG-1520 | 1000KW | IDΦ280 ODΦ325 | 5-20 |
64” | HYG-1620 | 1000KW | IDΦ320 ODΦ377 | 5-20 |
The HYG series Hydraulic Induction Hot Pipe Bending Machine With Plc System is designed for manufacturing the long radius(2.5D-6D) bended pipes with diameter from 1/2" to 28". These produced bended pipes are widely used in the connection of the industrial pipelines for the Petrochemical, Gas and Oil pipes, Electrical Power, Food, etc.
Our PLC Automatic Induction Pipe Bending Machine has following
advantages:
1. Main body is strength and durable.
2. Underframe welded with structural steel and steel plate, and
machine milling. Pushing plate using T type groove structure,
travel smoothly. Under the push board with grey iron plate,
wear-resisting. Have wear compensation regulating variable.
3. Bending radius is adjusted by cycloidal motor drive screw rod
adjustment, convenient adjustment, high precision.
4. Hydraulic system uses frequency control, working speed stepless
variable speed, convenient adjustment, improve the production
efficiency, saving energy save electricity. According to the
feeding speed control motor speed, adjust the fuel delivery
accordingly, on-demand oil supply, hydraulic oil without high
pressure unloading, the oil temperature not too high.