SHEAN (CANGZHOU) CORP LTD |
|
Medium Frequency Induction Heating Elbow Cold Forming Machine
Now the ship, petrochemical, gas and other industries are
developing rapidly, in these industries, the pipeline system is
necessary, and among them
Used to transport liquid or gas pipe elbow demand is also more and
more, so elbow processing methods and productivity
It's becoming more and more important.Elbow processing methods have
a lot of, cold push made of technology is a very widely used
Working method.
When the mandrel elbow forming hydraulic press is used to produce
elbow, the tube billet is first sawed and blanked, and then cold is
used
Push the processing method for mass production, and then the elbow
groove for processing.This method of production process is very
simple, production
High efficiency, fine products, no need for excessive polishing,
for the operator, can also reduce the labor intensity,
In the production process will not produce a lot of surplus
material, but the shape of opening material is complex.Mandrel
hydraulic press of the main working process
The clamping cylinder should be closed and the mould should be
locked. When pushing the workpiece, the clamping cylinder is always
in the clamping state.
Wait until the end of the push, the locking cylinder to open the
mold.For medium and small carbon steel, stainless steel elbow can
be used elbow molding special
Hydraulic press for production, the production of elbow wall
thickness uniformity, good quality, for reducing elbow pipe
fittings, can also be used
Elbow forming hydraulic press for production.
The main features are as follows:
1. This series of machines are divided into two forms, the integral
frame type and the four-column split structure, which have the
advantages of strong rigidity, beautiful appearance, stable and
reliable performance, etc.
2. The machine adopts proportional hydraulic control system, which
has the advantages of energy saving, low noise, stable transmission
and long service life.The hydraulic system adopts high quality
sealing, sealing performance is good, ensure no leakage completely.
3. Electrical PLC programmable controller, touch screen, sensor can
realize man-machine interface control, instead of the original
console and display, with data display and parameter setting and
storage functions, give people a more direct visual sense, easier
to operate.
4. There are three operation modes: inching, manual and
automatic.Each operation mode can be adjusted by the transfer
switch.
5. This series of machine electrical components, hydraulic
accessories, pump valves and other main components are adopted
domestic and foreign well-known brands, in line with the CE
standard.
6. This machine has unique demoulding mechanism and mould design,
making mould adjustment convenient and quick.
I.Elbow Cold Forming Machine Main USES and features
Cold bend forming machine is mainly suitable for stainless steel
pipe fittings, special equipment and pushed into the 90 ° elbow
molding method for side ejector push straight in the main mode of
bending on the mandrel, and equipped with an automatic stripping
device will bend off from core rod, the electric system adopt PLC
control, hydraulic system adopts cartridge valve, convenient
maintenance, simple operation, high production efficiency.
II.Elbow Cold Forming Machine The unit structure
The equipment is mainly composed of main engine, hydraulic station,
electric control cabinet and limit device
Elbow Cold Forming Machine Specifications:
1.Production Range:od21mm-310mm
2.Raduius:1d,1.5d
3.Thickness:3mm-18mm
4.Material:Stainless steel
5.Drive type:Hydraulic
Accessories for the progress
1.Mandrels
2.Moulds
3.Hydraulic oil