|
[China]
Trade Verify
Address: Qianqiao Industrial Park, Huishan District, Wuxi City, Jiangsu Province
Contact name:Jeff
EDEST STEEL CO.,LTD |
|
Verified Suppliers
|
|
|
EDEST manufactures 316 stainless steel coil products in
customizable shapes, sizes and surface finishes.
You can get 316 stainless steel coils with a 2B surface treatment
grade, which improves the overall corrosion resistance of the
product.
BA Finish Stainless Steel 316 Coil has a very shiny and bright
surface and is known for its aesthetic appeal and is the best
corrosion-resistant material for stainless steel plates for
elevator decoration, furniture decoration, industrial building
decoration.
The main difference between the low carbon and high carbon versions of SS 316 stainless steel coils is their carbon content, which results in different properties.
Low carb version:
316L stainless steel coil, which has a lower carbon content than
standard 316 stainless steel. This low carbon content helps prevent
sensitization, the formation of carbide precipitation at grain
boundaries, which can adversely affect the material's corrosion
resistance. Therefore, when maximum corrosion resistance is
required, especially in environments exposed to chlorides, the
low-carbon material 316L stainless steel coil is preferred and is
therefore often used for large welded components.
The high-carbon version of SS 316 stainless steel contains more carbon than the standard 316 grade. This increased carbon content can increase the strength and hardness of the material, but may also reduce its corrosion resistance. High carbon stainless steel coils are generally not recommended for applications requiring maximum corrosion resistance.
In terms of application, low-carbon 316L stainless steel coil is very suitable for high-temperature environments due to its high melting point. They are commonly used in a variety of industries, including food preparation equipment (due to their food safety rating), marine fittings, springs, threaded fasteners, and more. On the other hand, higher carbon versions may find applications where increased strength and stiffness are required, but corrosion resistance is not a primary concern.
Product name | stainless steel coil |
Technique | Hot-Rolled, Cold-Rolled |
Standard | ASTM, JIS, GB, AISI, DIN, BS,EN. |
Thickness | 0.2-10MM |
Width | 1000mm,1219mm(4feet),1250mm,1500mm,1524mm(5feet),1800mm,2000mm or
as your requirements. |
Length | 2000mm,2440mm(8feet),2500mm,3000mm,3048mm(10feet),5800mm, 6000mm or
as your requirements. |
Surface | 2B/BA/HAIRLINE/8K/NO.4 |
Material | 200,300, 400 provide according to customer needs and uses |
Package | Waterproof paper, and steel strip packed. Standard Export Seaworthy Package.Suit for all kinds of transport,or as required |
Edge | Slit edge & mill edge |
| Chemical Properties of Frequently-used Stainless Steel Material Grade | |||||||||||
| UNS | ASTM | EN | JIS | C% | Mn% | P% | S% | Si% | Cr% | Ni% | Mo% |
| S30100 | 301 | 1.4319 | SUS301 | ≤0.15 | ≤2.00 | ≤0.045 | ≤0.03 | ≤1.00 | 16.0-18.0 | 6.0-8.0 | - |
| S30400 | 304 | 1.4301 | SUS304 | ≤0.08 | ≤2.00 | ≤0.045 | ≤0.03 | ≤0.75 | 18.0-20.0 | 8.0-10.5 | - |
| S30403 | 304L | 1.4306 | SUS304L | ≤0.03 | ≤2.00 | ≤0.045 | ≤0.03 | ≤0.75 | 18.0-20.0 | 8.0-12.0 | - |
| S30908 | 309S | 1.4833 | SUS309S | ≤0.08 | ≤2.00 | ≤0.045 | ≤0.03 | ≤0.75 | 22.0-24.0 | 12.0-15.0 | - |
| S31008 | 310S | 1.4845 | SUS310S | ≤0.08 | ≤2.00 | ≤0.045 | ≤0.03 | ≤1.50 | 24.0-26.0 | 19.0-22.0 | - |
| S31600 | 316 | 1.4401 | SUS316 | ≤0.08 | ≤2.00 | ≤0.045 | ≤0.03 | ≤0.75 | 16.0-18.0 | 10.0-14.0 | 2.0-3.0 |
| S31603 | 316L | 1.4404 | SUS316L | ≤0.03 | ≤2.00 | ≤0.045 | ≤0.03 | ≤0.75 | 16.0-18.0 | 10.0-14.0 | 2.0-3.0 |
| S31703 | 317L | 1.4438 | SUS317L | ≤0.03 | ≤2.00 | ≤0.045 | ≤0.03 | ≤0.75 | 18.0-20.0 | 11.0-15.0 | 3.0-4.0 |
| S32100 | 321 | 1.4541 | SUS321 | ≤0.08 | ≤2.00 | ≤0.045 | ≤0.03 | ≤0.75 | 17.0-19.0 | 9.0-12.0 | - |
| S34700 | 347 | 1.455 | SUS347 | ≤0.08 | ≤2.00 | ≤0.045 | ≤0.03 | ≤0.75 | 17.0-19.0 | 9.0-13.0 | - |
Surface treatment:
No.1
Polished with #100-#200 abrasive belt, it has good brightness and
discontinuous rough lines. It can be used as interior and exterior
decoration parts for buildings, electrical appliances, kitchen
utensils, etc.
2B
The surface brightness and smoothness of no2B is better than that
of no2D. Through special surface treatment to improve its
mechanical properties, No2B can almost meet the comprehensive
purpose.
BA
Cold rolled, bright annealed, smoothed, the products have excellent
brightness and good reflectivity, such as mirrors, kitchen
utensils, decorations, etc.
No 4
Use #150-#180 abrasive belt for polishing. It has better brightness
and discontinuous rough lines, but is finer than No.3. It is used
for bathtubs, interior and exterior decorations of buildings,
electrical appliances, kitchen utensils, food processing equipment,
etc.
HL
The No. 4 topcoat is polished with #150-#320 abrasive belt and has
continuous stripes. It is mainly used for architectural decoration
elevators, building doors, door panels, etc.
8K
This product has excellent brightness and good reflectivity and can
be used as a mirror
Our stainless steel coil is a metal material widely used in various industries, which has many unique properties such as corrosion resistance, high strength, good ductility and so on. Whether in construction, mechanical manufacturing, electronic equipment or medical devices, EDEST stainless steel rolls play an important role and contribute to the development of various industries. It is believed that with the continuous progress of science and technology, the application field of EDEST stainless steel coils will be more extensive, bringing more convenience and comfort to people's lives.
Service guarantee :
Standard Size In Stock As Below, Hot Rolled
| Thickness mm | Width mm | Grade | Length mm |
| 3.0 | 1,219 | 316L | 3,000-6,000 |
| 4.0 | 1,500 | 316L | 3,000-6,000 |
| 5.0 | 1,500 | 316L | 3,000-6,000 |
| 6.0 | 1,219 | 316L | 3,000-6,000 |
| 12.0 | 1,500 | 316L | 3,000-6,000 |
| 14.0 | 2,000 | 316L | 3,000-6,000 |
| Packaging and delivery | |
| Packaging Details | With wooden pallets, Standard Sea Worthy Package or as per customer required |
| We wrap the stainless steel products with outer packaging(edgeboard and wood footplate) and inner packaging (corrugated board or customized). | |
| Packaging and delivery | |
| Supply Ability | 5000 Ton/Tons per Month |
| Lead time | ||||
| Quantity (ton) | 10 - 100 | 101 - 200 | 201 - 500 | > 500 |
| Lead time (days) | 10 | 15 | 25 | To be negotiated |
We have a standing inventory of more than 200,000 tons of stainless steel coil stocks of various grades, widths and thicknesses to meet customers' delivery needs.
1. Blasting Machine Cleaning The Steel Surface
2. Fiber Machine Cutting The Plate As The CAD Drawings
3. Bending Machine
4. Drill Machine Drill The Holes.
5. Laser & Punch
6. Laser Cutting
7. Folding
8. Insert Installation
9. Fabrication
10. Assembly
EDEST STEEL CO., LTD is a large comprehensive steel enterprise in China specializing in the export of stainless steel and carbon steel. With over 26 years of experience in production, processing, and sales, we maintain ample stock of stainless steel, carbon steel, and other steel materials. Currently, we have established six major production bases nationwide, to provide diversified processing and production of stainless steel, carbon steel, and other metal materials to meet your various procurement needs. Our high-quality products are well-suited for industries such as energy, manufacturing, machinery, and healthcare.
We are a leading one-stop high-end manufacturing service enterprise in China, equipped with capabilities in steel material processing, component fabrication, finished product manufacturing, and professional technical services. We aim to provide comprehensive support to global end-user manufacturing enterprises.
We passed certificate ISO9001,ISO14000,OHSAS18001.As a member of China iron and steel association,we established long term friendly cooperation with famous domestic mill plants,such as Bao steel,Wu steel,An steel,Tai steel etc. As well as active pursues partnerships foreign company ,in order to meet customer requirement. With concept of 'Keep Improving,Win-win Cooperation',and executed by reliable quality and after sales service system,edest steel gained good reputation from customers at home and abroad.We sincerely welcome you to come our company to negotiate business!
Since the establishment of the company, it has passed ISO9001/ISO14001/OHSAS18001 and other system certifications. MTC will be shipped with the goods when shipped. At the same time, support third-party inspection.
EDEST STEEL CO.,LTD.
Address : Qianqiao Industrial Park, Huishan District, Wuxi City, Jiangsu Province
Contact Person : Mr. Jeff
Mobile/WhatsApp : +8618921116238
Email : jeff@edesteel.com
Our price may not be the lowest, but we adhere to the "quality first, service first" Our price is reasonable, we will be your most satisfied supplier in China
If you have any questions, please feel free to contact us! We are committed to providing you with the best products at the most reasonable prices, always providing our best service.
