|
[China]
Trade Verify
Address: Room 903, Tower B, Qiuyi Road 58, Binjiang Dist., Hangzhou City, 310000, China
Contact name:admin
Hangzhou Ecoographix Digital Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
Agfa Graphic Art Imagesetter Film For Offset Printing
Model: ECOO-TDS
Brief introduction:
For years, recording film was the norm in the printing industry. However, your company has the option to keep using them. At our Shanghai Agfa branch, we offer original Agfa film produced in Belgium that's been recut and repackaged. This high-speed, red-sensitive film features an open system, ensuring hard dot image quality. It's perfect for use in image setters with a HeNe laser (630-670nm) or red laser diode. Plus, it processes perfectly in compatible chemistries. Embrace the future with our versatile film options.
Specification:
| Model | ECOO-TDS | |
| Plate Type | Alliance far red film | |
| Spectral Sensitivity | HeNe laser and red laser diode (630-670nm) | |
| Description | Emulsion coated on a 0.10 mm antistatic polyester base | |
| Practical Photographic Properties with Different Engine | ||
| Engine | Accuset | Avantra |
| Int. Setting | 170 | 230 |
| Practical Density | D.4.00-4.20 | D.4.10-4.30 |
| 5% | 5% | 5% |
| 50% | 57% | 53% |
| 95% | 98% | 96% |
| Developer | Agfa developers | |
| Processing time | 20-40 sec | |
| Processing temperature | 35ºC or 95ºF | |
| Developer Replenishment (eg, ACD/ASD) | 15% exposure | 50ml/m² |
| 50% exposure | 150ml/m² | |
| 85% exposure | 250ml/m² | |
| Anti-OX replenishment | 1000 ml/24h=0.264 US gallons/24h | |
| Fixer | Agfa fixer | |
| Fixing temperature | 32ºC or 90ºF | |
| Fixer replenishment (Without Fixer electrolysis) | 15% exposure | 500 ml/m² |
| 50% exposure | 300ml/m² | |
| 85% exposure | 100ml/m² | |
| Fixer replenishment with Fixer electrolysis | 125 ml/m² | |
| Practical set-up density | D 4.00-D.4.20 (dot gain depending on the optical quality of the imagesetter) | |
| Chemical Compatibility | Processable in all rapid access chemistries and in main hard dot chemistries such as RA2000, Fuji HQ QRD-1, AND QRD-1P | |
| Dimensional Stability | Humidity coef: 0.10mm base, Crh 0.016mm/m/%RH Temp. coef: 0.10mm base, Cot 0.018mm/m/1ºC | |
| Safe light | Dark Green recommended: Encapsulate T20/ND.75 or equivalent | |
| Storage | The films are preferably stored in a cool dry place temperature below 20ºC and relative humidity between 30% and 60% | |
Features:
5. Eco-Friendly and Cost-Efficient Refilling, Limited Chemical
Usage.
6. Even yield for standard screening, endorsed for arbitrary screening.
7. Pre and Post-processing protection against static electricity.
8. An unrestricted system that guarantees superior processing in
matching chemicals. Stay positive in content and avoid negativity.
Sizes:
390mmX60m 610mmX60m
406mmX60m 660mmX60m
457mmX60m 813mmX60m
508mmX60m 838mmX60m
558mmX60m 914mmX60m
Other sizes are also available as required.
Unpacking:
For daylight loading, use the special cassette in the laser image
output machine. For darkroom loading, use the special cassette and
work under a special dark green light or in total darkness. Be
cautious to avoid damaging the film by avoiding friction, folding,
oil, and fingerprints. Remember to handle with care to produce the
best possible outcome.
Storage:
To ensure the longevity of your films, it's important to store them
in a cool and dry area. Keep the storage temperature under 20°C and
the humidity level no higher than 65%. Exposing your films to
extreme heat and moisture can shorten their shelf life.
Additionally, it's crucial to protect them from radiation,
corrosion, and sunlight. By following these simple steps, you can
safeguard your cherished memories and retain their quality for
years to come.
