Active Member
|
Address: Nanyi Road No.228,Dongying City, Shandong Province, China
Phone: 86-0546-7766986
Contact name:Miss. Grace
Dongying Kangyu petroleum Engineering Technology Service Co.,Ltd |
|
Instruction of downhole motor:
Down-hole motor is a kind of downhole drilling tool powered by mud. The mud from mud pump enters motor by way of bypass valve, and a pressure drop between motor inlet and outlet created, such pressure drop will drive the motor rotator to rotate, and transmit the torque and rotary speed to bit by universal shaft and transmission shaft. The downhole motor property mainly depends upon its property parameters. This product uses the high and new technology of coating to avoid coating off of rotors resulted from the traditional technology. Its strength and life are greatly improved. It is applicable to directional drilling horizontal drilling, composite drilling, cluster wells, sidetrack wells and well workover etc.
Technical parameters of downhole motor:
Type | 5LZ73×7.0 | 5LZ89×7.0 | 5LZ95×7.0 | 7LZ95×3.5 | 9LZ95×7.0 | 5LZ120×7.0 | |
Hole Size | Mm | 95~121 | 114~152 | 118~152 | 118~152 | 118~152 | 149~200 |
In | 33/4~43/4 | 41/2~6 | 45/8~6 | 45/8~6 | 45/8~6 | 57/8~77/8 | |
Thread Type | Top | 23/8"REG | 23/8"REG | 27/8"REG | 27/8"TBG | 27/8"REG | 31/2"REG |
Bottom | 23/8"REG | 23/8"REG | 27/8"REG | 27/8"REG | 27/8"REG | 31/2"REG | |
Nozzle pressure drop | Mpa | 1.4~7 | 1.4~7 | 1.4~7 | 1.4~3.5 | 1.4~7 | 1.4~7 |
Recommend Flow | L/S | 3~8 | 3~8 | 7~12 | 7~11 | 6~10 | 9~14 |
Bit rotary | R/Min | 109~291 | 95~200 | 90~195 | 120~240 | 90~200 | 95~200 |
Motor pressure drop | Mpa | 2.4 | 2.4 | 3.2 | 2.4 | 2.4 | 3.2 |
Working torque | N.M | 460 | 628~838 | 1260~1630 | 723~960 | 750~1020 | 1480~1820 |
Lagging torque | N.M | 650 | 1300 | 2200 | 1500 | 1550 | 2440 |
Output power | KW | 4.7~12.5 | 7.3~15.3 | 13.6~29.5 | 18~24 | 8.3~18.5 | 16.4~34.5 |
Recommended bit weight | T | 4.7~12.5 | 2.0 | 2.5 | 1.0 | 2.5 | 3 |
Max bit weight | T | 2.5 | 3.0 | 5 | 1.5 | 5 | 5 |
Length (mm) | Straight | 3450 | 3570 | 4450 | 2500 | 3590 | 5085 |
Single curve | 3450 | 4675 | 3590 | 5335 | |||
Weight (Kg) | Straight | 100 | 98 | 140 | 89 | 120 | 390 |
Single curve | 102 | 150 | 120 | 420 | |||
Type | 5LZ165×7.0 | 5LZ165×7.0 | 5LZ172×7.0 | 5LZ197×7.0 | 5LZ210×7.0 | 5LZ244×7.0 | |
Hole Size | Mm | 213~251 | 213~251 | 213~251 | 251~311 | 251~375 | 311~445 |
In | 83/8~97/8 | 83/8~97/8 | 83/8~97/8 | 97/8~121/4 | 97/8~143/4 | 121/4~171/4 | |
Thread type | Top | 41/2"REG | 41/2"REG | 41/2"REG | 51/2"REG | 65/8"REG | 65/8"REG |
Bottom | 41/2"REG | 41/2"REG | 41/2"REG | 65/8"REG | 65/8"REG | 75/8"REG | |
Nozzle pressure drop | Mpa | 1.4~7 | 1.4~7 | 1.4~7 | 1.4~7 | 1.4~7 | 1.4~7 |
Recommend Flow | L/s | 20~28 | 20~28 | 25~35 | 25~57 | 35~50 | 50~75 |
Bit rotary | R/min | 90~160 | 80~150 | 90~160 | 86~196 | 100~160 | 100~160 |
Motor pressure drop | Mpa | 2.4 | 3.2 | 4.0 | 4.0 | 4.0 | 4.0 |
Working torque | N.m | 2750~3960 | 3860~4980 | 5860~6970 | 7800~9350 | 9980~11900 | 12870~13970 |
Lagging torque | N.m | 6300 | 8470 | 11550 | 18690 | 19600 | 23000 |
Output power | Kw | 31.6~56.2 | 37~69.4 | 60.4~107.4 | 70~160 | 115~183 | 140~225 |
Recommended bit weight | T | 8 | 8 | 10 | 16 | 17 | 18 |
Max bit weight | T | 16 | 16 | 16 | 24 | 28 | 30 |
Length (mm) | Straight | 5930 | 6830 | 7230 | 8470 | 8400 | 9060 |
Single curve | 6180 | 7080 | 7480 | 8720 | 8660 | 9320 | |
Weight (Kg) | Straight | 742 | 820 | 930 | 1140 | 1460 | 1980 |
Single curve | 772 | 850 | 970 | 1195 | 1520 | 2050 | |
Reference pictures of downhole motor:
If you have any need i can help,pls eamil me and talk detailes.
Grace sun
Tel:+86 546 7766986
+86 182 5465 9971(Whatapp)
Skype:sunping7766986
