Maccsy Machinery Co., Ltd |
Photo of the Horizontal plastic injection molding machine PM1000J
Technical parameters
SPECIFICATION | PM1000J | |||
A | B | C | ||
INJECTION UNIT | ||||
Screw diameter | mm | 67 | 70 | 75 |
Screw L/D ratio | L/D | 22.5 | 21.5 | 20 |
Shot volume(theoretical) | cm3 | 1181 | 1289 | 1480 |
Injiection weight(ps) | g | 1076 | 1175 | 1349 |
Injection rate | g/s | 337 | 368 | 422 |
Injection pressure | Mpa | 186 | 170 | 148 |
Screw pressure | rpm | 190 | ||
CLAMPING UNIT | ||||
Clamping force | kN | 3200 | ||
Open stroke | mm | 660 | ||
Space between tie bars(W×H) | mm | 660×660 | ||
Max.Mold height | mm | 720 | ||
Min.Mold height | mm | 250 | ||
Ejector stroke | mm | 160 | ||
Ejector force | kN | 70 | ||
OTHERS | ||||
Max.Pump pressure | MPa | 16 | ||
Pump motor power | kW | 37 | ||
Heating power | kW | 24.7 | ||
Machine dimension(L×W×H) | m | 7.21×1.90×2.34 | ||
Oiltank cubage | L | 500 | ||
Machine weight | t | 12.5 |