Active Member
|
Address: No.11, North of Kaiyuan Road, High-tech Zone, Jining City,Shandong Province, China
Phone: 86-537-2350961
Contact name:Mr. Mike
Shandong China Coal Industry & Mining Group Co.,Ltd |
|
|
Product Introduction:
Introduce and absorb foreign and advanced manufacturing technology of bending machine
Abundant craft experience of bending tubes and advanced mold design
Lathe bed is welding construction. Its rigidity is good and it has elegant appearance.
The machine is driven by hydraulic system. Operation is controlled by control panel. Preset bending angel by limit switch.
Select Japanese Mitsubishi programmable controller.
Electric control can realize jog movement, step movement and automatic movement.
Adopt integrated circuit block structure. Systematic dependability of the hydraulic system is high.
Equipped with mandrel structure. The machine can bend tube with or without mandrel.
Equipped with security spacing and emergency stop buttons to guarantee operator's security.
Bend different kinds of materials by changing the molds
Clamp and mandrel units are equipped with the independent cylinder transmission. When bend arm turns round, tube can be bended with high accuracy in the common restraints of above-mentioned parts and each part of the mold.
Main Parameters:
No | Technical Specifications | Value | Unit | |
1 | Max axial torque(KN/m) | 168 | KN/m | |
2 | Max capacity | 114X8 | mm | |
3 | Minimum bending diameter | 12 | mm | |
4 | Max bending radius | R685 | mm | |
5 | Minimum bending radius | R44 | mm | |
6 | Max.bending angle | 195 | ° | |
7 | Bending Speed | 1.25 | r/min | |
8 | Returning Speed | 3.27 | r/min | |
9 | Main motor | Model | Y160L-4 | |
Power | 15 | KW | ||
Rotate | 1450 | r/min | ||
10 | Oil Pump | Model | YB-FQ40 | |
Max Pressure | 21 | Mpa | ||
Flow | 55 | L/min | ||
Working Pressure | 16 | Mpa | ||
11 | Out size | Length | 5800 | mm |
Width | 2300 | mm | ||
Height | 1700 | mm | ||
12 | Weight | 6,400 | kg | |
