Active Member
|
Address: 23M,Shidai Bldg.,Linyuan road,Mianyang,sichuan
Phone: 86-816-6075677
Contact name:Mr. gus zhang
Mianyang Prochema Commercial Co.,Ltd. |
|
Fluorinated ethylene-propylene (FEP) resin, as a copolymer of tetrafluoroethylene and hexafluoropropylene, has good heat stability, outstanding chemical inertness, excellent electrical insulation and low friction coefficient, and can be processed by a thermoplastic processing method.
Technical Index:
Item | Unit | DS601 | |||
Appearance | Translucent particle, with impurites such as metal debris and sand
, Containing visible black particles percentage point less than
2% | ||||
Melt index | g/10min | 0.8~2.0 | |||
Tensile strength, ≥ | MPa | 27 | |||
Elongation at break, ≥ | % | 320 | |||
Relative density | 2.14~2.17 | ||||
Melting point | ℃ | 265±10 | |||
Dielectric constant(106 HZ), ≤ | 2.15 | ||||
Dielectric loss factor(106 HZ), ≤ | 7.0×10-4 | ||||
Volatile matter, ≤ | % | 0.1 | |||
Hot stress crack resistance | —— | Uncracked | Uncracked | ||
Main Applications .
The low melting index resin and heat stress cracking resistanct moulding plastic,used for stress cracking resistanct requiring and low or medium speed processing, mainly for heat shrinkable tubes, pumps, valves, piping and lining ,wire insulation layer.
Attention:
The processing temperature should not exceed 420℃ ,to prevent toxic gas from releasing.
Packaging, Transport and Storage:
1. It should be packaged in two-layer plastic inner bag, and then sealed in hard drum. Each bag has net weight of 25kg and certificate of approval.
2. It should be stored in a clean, dry, cool and shady environment to prevent mixing of impurities.
3. It is nontoxic, non-inflammable, nonexplosive and noncorrosive, so it is transported according to non-dangerous goods.
