Lemin Plastics Mould Factory |
Single station automatic extrusion blow molding machine 1).The
screw adopt high potency melt to make sure the material well mixed
for different material such as PP, PE, PS, PAN, PA, PPE, PP0, ABS,
POM, TRV.
2).Adopt frequency control of motor system to reduce the power
consumption
3).Choose single and double station according to your output
easily.
4).Adopt horizontal movement frame to improve stability and speed.
5).The oil cylinder is in the center of the moldboard, uniform
stress for quality products and increase life span.
6).Three guild rod controller the mold open and clamp, to enhance
the steadily and high efficiency.
7).The extrusion frame use head device, to influence the melt
material avoid joint with the mold.
8).The extrusion head use spreader or screw type to well mixed the
thickness and easy to change different color.
9).Adopt parison control when necessary for thickness
10).The professional oil system to reduce strike and noise.
11).Use auto circular cutting system and automatic Conveyor belt
for fully automatic produce when necessary.
12).According customer's request, labeling machine is assorted.
Model No. | Unit | LM-S2L | LM-S5L | LM-S2L/T | LM-S5L/T | LM-S12L |
Max.Product Volume | L | 2 | 5 | 2L/1 | 5L/1 | 12L/1;5L/2 |
Dry cycle | pc/h | 800 | 600 | 800 | 600 | 600 |
Screw Diameter | mm | 50 | 60 | 30/50 | 30/60/70 | 80 |
Screw L/D ratio | L/D | 24~26 | 24~26 | 24~26 | 24~26 | 24~26 |
Screw motor power | Kw | 11 | 15 | 3.3/11 | 3.3/15 | 22~30 |
Screw heating capacity | Kw | 3.3~4.4 | 4.8~7.5 | 4~6.5 | 6~8 | 6.2~8.8 |
No. of heating zone | Zone | 3 | 3 | 3 | 3 | 4 |
Output of HDPE | Kg/hr | 30~45 | 50~60 | 30~45 | 50~60 | 70~75 |
Oil pump drive power | Kw | 7.5 | 7.5 | 7.5 | 7.5 | 11 |
Clamping force | KN | 38 | 60 | 38 | 60 | 110 |
Mold stroke | mm | 138~368 | 148~508 | 138~368 | 148~508 | 300~700 |
Size of Mold | (W*H)mm | 300×320 | 370×390 | 300×320 | 370×390 | 500×510 |
Max.die diameter | mm | 90 | 145 | 90 | 145 | 220 |
Die heat capacity | Kw | 2.8~3.5 | 3.5~4.3 | 2.8~3.5 | 3.5~4.3 | 4.4~5.5 |
Blowing pressure | Mpa | 0.6~0.8 | 0.6~0.8 | 0.6~0.8 | 0.6~0.8 | 0.6~0.80.7 |
Air Volume | M^3/Min | 0.4 | 0.6 | 0.4 | 0.6 | 0.6 |
Cooling water pressure | Mpa | 0.3 | 0.3 | 0.3 | 0.3 | 0.3 |
Water consumption | L/min | 35 | 55 | 35 | 55 | 60 |
Weight of machine | Ton | 2.78 | 3.9 | 3.0 | 4.0 | 7.8 |
Size of machine(L*W*H) | m | 3×1.6×2.1 | 3.5×1.8×2.1 | 3×1.6×1.75 | 3.5×1.8×2.1 | 3.3×3.3×2.6 |