|
Trade Verify
Address: Haikou city, Hainan Province, China
Phone: 86-898-68614077
Contact name:Mr. Vecent
Hainan Jhono Industry and Trade Co., Ltd. |
|
Verified Suppliers
|
|
|
We have sold this machine to "Nigeria" and etc. Welcome to write e-mail to us.
Structure is simple, neat exterior appearance, because the main
machine use steel structure ,machining before jointing
1. Brief Introduction
This Tile forming machine can form the steel or Aluminum sheet according to customer’s requirement continuous, and then automatically cut to length. The equipment adopts PLC control, AC frequency and adjusting the speed technology, and it realize the continuous automatically production, therefore, it is really a new type of energy-saving and high-effective producing equipment for metal roofing tile. And it has many advantages, just like high forming speed, low noise, stable transmission, easy operation, good appearance and so on.
2. Technical Parameters
No | Item | Parameter | Note | |
1 | Suitable
Material | Type | Aluminum sheet |
|
Width(mm) | 1220 |
| ||
Thickness(mm) | 0.35-0.7 |
| ||
Yield stress | 235MPA |
| ||
2 | Product Specifications | Cover width | 1000mm±5 | Detail as the attached drawing |
Step length(mm) | Min 100mm | |||
Step height(mm) | 20±0.5 | |||
Length | Any length | |||
3 | Power Requirement | Type | 380V/3PH/50HZ |
|
Main motor power(KW) | 5.5 |
| ||
Cutting power(KW) | 5.5 |
| ||
4 | Max Working Speed(m/min) | 5 | Including time of cutting and pressing | |
5 | Automatic
Decoiler
(Optional) | Type | Hydraulic |
|
Max. capacity(T) | 5 T |
| ||
Suitable coil OD(mm) | 1200 |
| ||
Suitable coil ID(mm) | 508 |
| ||
Max Coil width(mm) | 1250 |
| ||
6 | Forming Stand | 20 | Depend on actual design | |
7 | Forming Shaft Diameter(mm) | 80 | Depend on actual design | |
8 | Type of Cutting | Roll-formed and length-set cutting |
| |
9 | Control System | Mitsubishi PLC and inverter |
| |
10 | Finished table | 2 m × 2 |
| |
11 | Installation Dimension(m) | 16 ×3.5 | Without the panel length | |
12 | Total Weight(T) | Around 10 | Depend on actual design | |
Working Process
Decoiling the sheet----Sheet guiding----Roll forming----Pressing the step Measuring length----Cutting after shaping----Panels to the stacker
2. Machine photo
Shipping photo
Profile Drawing:
Contact us:
4. Main machine price
FOB Shanghai: $50,000.00USD----60,000.00USD
5. Payment (T/T)
40% as deposit, 60% is paid by T/T before shipment.
6. Delivery time: 90 days
Service rules:
A. In correct operating & maintaining ,the machine is guaranteed for one year since leaving the seller’s factory excluding the electric elements.
B. If necessary ,the seller will dispatch a technician to the buyer’s factory abroad to install ®ulate the machine ,the service charge is USD50.00 for one technician .the buyer will assist the seller’s technician to get the visa and will pay for the flight tickets and the local accommodation.
C. Guarantee one year for machinery.
