Beijing Silk Road Enterprise Management Services Co.,LTD |
Verified Suppliers
|
Full Automatic Non Woven High Speed N95 Mask Making Machine
The KN95 and N95 mask machine composed of non woven roll rack and
forming system. The forming system includes embossing, pressing,
cutting and conveying.The rollers on the rack can be adjusted to
match the forming system. The machine has high efficiency and less
waste, which steadily speeds up the collection and conveying of the
mask body. The rack and forming system matching nose bridge insert
and ear loop welding machine can make up a complete processing
line, which improves productivity and benefit to create greater
profits.
Main function
high-speed full-automatic one-tow-two mask machine is mainly
composed of the body machine, the flap conveying line and two ear
band welding machines.After the machine outputs the mask body, the
conveyor belt structure transmits the mask body piece to the
turnover mechanism. The mask disc is flipped onto the conveyor belt
connected to the ear strap machine by a flip mechanism, then the
mask sheet will be transported to the front of the ear belt machine
above the mask plate through the conveyor belt, place the mask
sheet into the mask plate of the earband machine by pressing down
the cylinder, subsequent welding of the ear bands of the mask by
the ear band machine, to complete the production of a flat outer
ear mask product, the layout of the automatic line is as
follows,the whole line is one - tow - two structure.
Product Features
1. Aluminium alloy structure is adopted, which is beautiful and
firm without rust.
2. Computer PLC (Mitsubishi PLC) programming control, high
stability, low failure rate and low noise.
3. Servo motor imported from Taiwan, stepper motor drive, high
precision.
4. Photoelectric detection of raw materials to avoid mistakes and
reduce waste.
5. The machine adopts pulleys and fixed feet, which is convenient
and fast to move, strong fixation, and does not shake.
Technical parameters
Imput raw materials, automatic feeding, nose line cutting /
feeding, hemming welding, folding scene, forming welding,
photoelectric detection, automatic slicing, finished product
output, receiving tray sorting, full automation
Item | Parameter |
Voltage | AC220V 50-60HZ |
Production efficiency | 30-40 pieces / min |
Power | 10KW |
size | 1050 (length) * 150 (width) * 180 (height) |
Weight | weight ≤1500KG Ground load 350KG / ㎡ |
Color | Color Sheet metal warm gray 1C, primary color of aluminum profile |
Working power supply | 220VAC ± 5% 50HZ grounding protection rated power ≤10KW (including welding machine) |
Compressed air | 0.4-0.6MP (clean water after dewatering, no oil, filtration, pressure stabilization), use flow rate is about 300L / min |
Production efficiency | 30-40PCS / min (according to the actual debugging effect) |
Product qualification rate | 99% (except for the original material and human operation) |
Main accessories | Cylinder: AirTAC Screw guide rail: HIWIN / TBI PLC: Mitsubishi or Xinjie |
Operating environment | General workshop environment is acceptable (no corrosive odor, no dust) |
equipment use matters needing attention:
The machine should be installed on a flat and solid ground, and
sufficient operation and maintenance space should be reserved
around the machine
1. Temperature: The normal ambient temperature must be 5°C ~ 40°C.
2. Humidity: 30% ~ 90%.
3. Keep away from paint (gasoline), chemicals, acid, alkaline and
explosive or flammable materials.
4. Avoid neighbouring machines that can cause vibration. Ambient
lighting: above 300LUX
1. After the machine is positioned, adjust the foot cup of the
machine and use the horizontal auxiliary tool until it is adjusted
to the level.
2. Connect the power cord. This machine uses 220V single-phase,
50HZ power. It is strictly prohibited to connect 380V or other
power sources that do not meet the requirements. Please pay special
attention to the user! To ensure safety, the connection work must
be completed by an electric professional, and a connection cable is
provided. If self-equipped power plug is used, 2.5mm2 three-core
cable must be used to correctly connect live wire (L), neutral wire
(N) and ground wire (E).