Home Companies Anhui SURE ELECTRONICS CO.,LTD

3 Stage Automatic Car Battery Charger AGM WET Fast Charger

Active Member

Contact Us

[China]

Address: NO.58 PARK,QINLAN TOWN TIANCHANG CITY CHINA

Contact name:Lavia

Anhui SURE ELECTRONICS CO.,LTD

3 Stage Automatic Car Battery Charger AGM WET Fast Charger

Country/Region	china
Categories	Mobile Phone Keypads

Product Details

Automatic Car Battery Charger AGM WET Fast Charger

Product Description

This is a fully automatic battery charger with 3 charge stages.
Automatic charging protects your battery from being overcharged. So you can leave the charger connected to the battery indefinitely.
3-stage chargers are suitable for most battery types including Calcium, Gel and AGM, Wet batteries. They may also help restore drained and sulphated batteries.
LED screen: it shows both charging voltage and current. The charging light will be bright when charging,when charging full the light will be off.
Suitable for household toy cars, vans, trucks, motorcycles, cars, agricultural vehicles battery charge.
Intelligent Battery Charger only, other accessories demo in the picture is not included!

Product Name	Lead Acid Battery Charger
Model	SURE 12V6A
Material	ABS flame retardant material
Input Voltage	13.8~14.4V
Output Current	6A 3A 2A
Function	Pulse repair, zero voltage output, reverse polarity protection, temperatures control
Product Weight	600G
Charging time	6~8 hour

Specification for battery charger
Model	Input Voltage	Output Voltage
12V-24V-6A	220V 50Hz	12V 24V 6A
12V-24V-7A	220V 50Hz	12V 24V 7A
12V-24V-10A	220V 50Hz	12V 24V 10A
12V-24V-15A	220V 50Hz	12V 24V 15A
12V-24V-40A	220V 50Hz	12V 24V 40A
12V-24V-50A	220V 50Hz	12V 24V 50A
12V-24V-60A	220V 50Hz	12V 24V 60A
12V-24V-80A	220V 50Hz	12V 24V 80A

12V 5A 6A Motorcycle Car Battery Charger Pulse Repair Lead Acid
Battery Charger 12V EU US UK AU

Description

Microprocessor Control (CPU).
3-STAGE AUTOMATIC CHARGING:
This is a fully automatic battery charger with 3 charge stages.
Automatic charging protects your battery from being overcharged. So you can leave the charger connected to the battery indefinitely.
3-stage chargers are suitable for most lead acid battery:Calcium, Gel and AGM, Wet batteries. They may also help restore drained and sulphated batteries.

1:Input Characteristics:

Input Voltage: 100-240V AC
Input Frequency: 50Hz or 60Hz and single phase.
Inrush Current (cold start):30A Max.@110Vac/60HZ/ 60A Max.@230Vac/50HZ
Efficiency: ≥85.0% 230Vac/50Hz(Typical full load)

2:Output Characteristics:
Constant Charging Voltage: 14.7V Float charge 13.8V
C:Charging Mode Intelligent 12V 5-6A lead acid battery charger

3 Stages, CC, CV, Trickle

4:Safety Test for battery charger
Hi-pot Test:15KVac 5mA 3 Seconds between input and output test
Resistance:The liftpo4 battery charger insulation resistance shall be not less 30M ohms after application of 500Vdc/10mA for 3 Seconds
Drop test: Height: The wheelchair battery chargerconform to BS EN60068-2-32:1993 TEST ED: free fall appendix B

5:Protection for battery charger
Over Voltage Protection:The power supply will be auto recovered when faults remove
Over Current Protection: Charger output current does not exceed the set maximum battery charging current.
Over Short Circuit Protection :Battery charger output can be shorted without damage No odor, smoke, fire, plastic deformation, and excessive heal happen. The power shall be auto-recovery. (It will enter into normal condition when then the fault condition is removed)
Over reverse polarity Protection When the battery charger output line reversed after the charger will not work until the right user access only to start.

1:Compatible with most brands of electric vehicles

2:Applicable to most brands of electric vehicles in the market
3:Zero voltage output
4:Reverse polarity protection
5:Dual timing
6:SMD process
7:ABS flame retardant box
8:Good quality Charger Cable
9:MM Thicker Charger Cable
10:Safe Silent
11:Reject inferior
12:Overload protection
13:Short-circuit protection
14:Overvoltage protection
15:Overcurrent protection

Our Services

Our Service

1. OEM Manufacturing welcome: Product, Package,logo and brand.
2. Sample order :Free sampls but you need pay for freight.
3. We will reply you for your inquiry in 24 hours.
4. after sending, we will track the products for you once every two days, until you get the products. When you got the goods, test them, and give me a feedback.If you have any questions about the problem, contact with us, we will offer the solve way for you.