Active Member
|
[China]
Address: NO.58 PARK,QINLAN TOWN TIANCHANG CITY CHINA
Contact name:Lavia
Anhui SURE ELECTRONICS CO.,LTD |
|
|
| Product Name | Lead Acid Battery Charger |
| Model | SURE 12V2A |
| Material | ABS flame retardant material |
| Input Voltage | 13.8~14.4V |
| Output Current | 6A 3A 2A |
| Function | Pulse repair, zero voltage output, reverse polarity protection, temperatures control |
| Product Weight | 600G |
| Charging time | 6~8 hour |
| AC input voltage | 100-240Vac 50~60Hz | Material | Aluminum |
| DC output voltage & current | 12V 2A | Method | CC/CV |
| Specification | 150 * 85 * 60 mm | N.W. | 1 KG |
| Operating temperature | -10℃~+50℃ | Storage Temperature | 40℃~+80℃ |
| Warranty | 3 years | Certificates | CE/ROHS/FCC/SAA |
| The indicator of LED colors: "RED" means charging, "GREEN" means
charging is complete. | |||
12V 5A 6A Motorcycle Car Battery Charger Pulse Repair Lead Acid
Battery Charger 12V EU US UK AU
Description |
Microprocessor Control (CPU). 3-STAGE AUTOMATIC CHARGING: This is a fully automatic battery charger with 3 charge stages. Automatic charging protects your battery from being overcharged. So you can leave the charger connected to the battery indefinitely. 3-stage chargers are suitable for most lead acid battery:Calcium, Gel and AGM, Wet batteries. They may also help restore drained and sulphated batteries. 1: Input Characteristics: Input Voltage: 100-240V AC Input Frequency: 50Hz or 60Hz and single phase. Inrush Current (cold start):30A Max.@110Vac/60HZ/ 60A Max.@230Vac/50HZ Efficiency: ≥85.0% 230Vac/50Hz(Typical full load) 2: Output Characteristics: Constant Charging Voltage: 14.7V Float charge 13.8V C:Charging Mode Intelligent 12V 5-6A lead acid battery charger 3 Stages, CC, CV, Trickle 4: Safety Test for battery charger Hi-pot Test:15KVac 5mA 3 Seconds between input and output test Resistance:The liftpo4 battery charger insulation resistance shall be not less 30M ohms after application of 500Vdc/10mA for 3 Seconds Drop test: Height: The wheelchair battery chargerconform to BS EN60068-2-32:1993 TEST ED: free fall appendix B 5: Protection for battery charger Over Voltage Protection:The power supply will be auto recovered when faults remove Over Current Protection: Charger output current does not exceed the set maximum battery charging current. Over Short Circuit Protection :Battery charger output can be shorted without damage No odor, smoke, fire, plastic deformation, and excessive heal happen. The power shall be auto-recovery. (It will enter into normal condition when then the fault condition is removed) Over reverse polarity Protection When the battery charger output line reversed after the charger will not work until the right user access only to start. |
1:Compatible with most brands of electric vehicles
2:Applicable to most brands of electric vehicles in the market
3:Zero voltage output
4:Reverse polarity protection
5:Dual timing
6:SMD process
7:ABS flame retardant box
8:Good quality Charger Cable
9:MM Thicker Charger Cable
10:Safe Silent
11:Reject inferior
12:Overload protection
13:Short-circuit protection
14:Overvoltage protection
15:Overcurrent protection
Our Service
1. OEM Manufacturing welcome: Product, Package,logo and brand.
2. Sample order :Free sampls but you need pay for freight.
3. We will reply you for your inquiry in 24 hours.
4. after sending, we will track the products for you once every two
days, until you get the products. When you got the goods, test
them, and give me a feedback.If you have any questions about the
problem, contact with us, we will offer the solve way for you.
