Active Member
|
[China]
Address: Room1409, Building No.2, Yabao Oriental International, Jinshui East Road, Zhengdong New District, Zhengzhou city, Henan province, China
Contact name:sales01
Henan Wein Industry Co., Ltd. |
|
|
High Strength Water Well Drill Pipe With Thru Wall Heat Treated Tube Body
Each of drill pipe is treated by shot peening. After shot peening treatment, surface of drill pipe and thread gets residual pressure stress. This stress can improve drill pipe anti-fatigue service life. Shot peening treatment on thread can help thread compound adhering to thread. Thread service life is improved.
HDD drill pipe is a tool applicable for transferring torque and tension of drillers in the process of directional drilling construction. Due to the fact that it has to bear torsion, tension, bending, friction and vibration in the process of directional construction, the requirements for processing process are very strict.
Drill rods for HDD machine. High strength, high tenacity, high elasticity. Dia from 42mm to 140mm. Length from 0.5m to 9.6m. Steel grade: E75/R780,G105,S135 We can make the drill rods for Vermeer,Case,Ditch Witch, Drillto, Gudeng, Xugong HDD machines, such as D16X20, D24X40, D50X100, D75, D80, D100, D130, JT1720, JT2720, JT2720 March I, JT4020, JT7020, API NC23-NC50, etc.
More details of High Strength Ditch Witch Drill Rods With Thru - Wall Heat Treated Tube Body
| Size (in) | Nominal Weight (1b/ft) | OD of Pipe Body | Wall Thickness of Pipe Body | Grade | Upset Type | Conn. Type | OD of Pin and Box | ID of Pin | ||||
| (in) | (mm) | (in) | (mm) | (in) | (mm) | (in) | (mm) | |||||
| 2 3/8 | 6.65 | 2 3/8 | 60.32 | 0.280 | 7.11 | EXGS | EU | NC26 (2 3/8 IF) | 3 3/8 | 85.70 | 1 3/4 | 44.45 |
| 2 7/8 | 10.40 | 2 7/8 | 73.02 | 0.36 | 9.19 | NC31 (2 7/8 IF) | 4 1/8 | 104.80 | 2 | 50.80 | ||
| 3 1/2 | 13.30 | 3 1/2 | 88.90 | 0.37 | 9.35 | NC38 (3 1/2 IF) | 5 | 127.00 | 2 7/16 | 61.91 | ||
| 3 1/2 | 15.50 | 3 1/2 | 88.90 | 0.45 | 11.40 | NC38 (3 1/2 IF) | 5 | 127.00 | 2 1/8 | 53.98 | ||
| 4 | 14.00 | 4 | 101.60 | 0.33 | 8.38 | NC46 (4 IF) | 6 | 154.20 | 3 1/4 | 82.55 | ||
| 4 1/2 | 16.60 | 4 1/2 | 114.30 | 0.34 | 8.56 | IEU | NC40 (4 IF) | 6 1/4 | 158.80 | 3 | 76.20 | |
| 4 1/2 | 20.00 | 4 1/2 | 114.30 | 0.43 | 10.92 | NC46 (4 IF) | 6 1/4 | 158.75 | 2 1/2 | 63.50 | ||
| 5 | 19.50 | 5 | 127.00 | 0.36 | 9.19 | NC50 (4 1/2 IF) | 6 5/8 | 168.30 | 3 1/4 | 82.55 | ||
| 5 | 19.50 | 5 | 127.00 | 0.36 | 9.19 | 5 1/2 FH | 7 | 177.80 | 3 3/4 | 95.25 | ||
| 5 | 25.60 | 5 | 127.00 | 0.50 | 12.70 | NC50 (4 1/2 IF) | 6 5/8 | 168.28 | 2 3/4 | 69.85 | ||
| 5 | 25.60 | 5 | 127.00 | 0.50 | 12.70 | 5 1/2 FH | 7 1/4 | 184.15 | 3 1/4 | 82.55 | ||
| 5 1/2 | 21.90 | 5 1/2 | 139.70 | 0.36 | 9.17 | 5 1/2 FH | 7 1/4 | 184.15 | 3 1/2 | 88.90 | ||
| 5 1/2 | 24.70 | 5 1/2 | 139.70 | 0.42 | 10.54 | 5 1/2 FH | 7 1/4 | 184.15 | 3 1/2 | 88.90 | ||
| 6 5/8 | 25.20 | 6 5/8 | 168.28 | 0.33 | 8.38 | 6 5/8 FH | 8 1/4 | 209.55 | 4 3/4 | 120.65 | ||
| 6 5/8 | 27.70 | 65/8 | 168.28 | 0.36 | 9.19 | 6 5/8 FH | 8 1/4 | 209.55 | 4 3/4 | 120.65 | ||
Technical Parameters:
| Grade | Yield Strength | Tensile Strength | Extension Rate | Impact Power Akv J | ||||
| Min | Max | Min | Min | 10×10 | ||||
| Psi | Mpa | Psi | Mpa | Psi | Mpa | % | (-20°C) | |
| G105 | 105,000 | 724 | 135,000 | 931 | 115,000 | 793 | 15 | ≥68 |
| S135 | 135,000 | 931 | 165,000 | 1138 | 145,000 | 1000 | 13 | ≥54 |
Our Services
1 We not only have ourselves design but also can accept customization
2 We have fast and on time delivery time
3 Every pipes have it's quality assurance
4 Contact our anytime if you have any question with bits.
5 24 hours on time reply
