|
[China]
Trade Verify
Address: No55. Jiucaiyuan road, Furong District, Changsha, Hunan,China
Contact name:Ling Bo
Changsha Sollroc Engineering Equipments Co., Ltd |
|
Verified Suppliers
|
|
|
4'' DTH Hammer with External Diameter 99mm and 2 3/8'' API REG for Well Drilling
Product description:
A down-the-hole hammer (DTH hammer) is a tool that can be attached to the end of a drill string and inserted into a bore. It's a small jack hammer used to break hard rock into small particles that can be flushed away by the DTH hammer's air exhaust.It is one of the mainstream drilling technologies for mining and quarrying worldwide. Recent improvements have largely been aimed at making systems more fuel-efficient and at optimizing tool life.
Product Advantages:
1.Capable of drilling in almost all ground conditions.
2.Constant energy directly behind bit provides speed with less
power loss and greater hole accuracy.
3.Rigid drill string improves hole alignment.
4.cost-efficient and environmentally friendly drilling
DTH Hammer specification:
HD45A hammer
| shank | HD45A |
| Length(less bit) | 1011mm |
| External diameter | 92mm/99mm (optional) |
| Top sub thread | API 2 3/8”REG |
| Weight(less bit) | 39kg |
| Hole range | 110mm-130mm |
| Working pressure | 1.0-2. 5Mpa(145-362.5psi) |
| Impact rate at 1.7Mpa | 30Hz |
| Recommended rotation speed | 22-35rpm |
HD45A bit specification
| For 4" hammer DTH bits shank | Bit Dia. | No. Air Holes | Gauge Buttons | Front Buttons | Weight (Kg) | Part No. | |
| mm | inch | ||||||
| HD45A | 105 | 4 1/8" | 2 | 6×φ14 | 5×φ13 | 9.0 | DHD340-105 |
| 110 | 4 1/4" | 2 | 7×φ13 | 6×φ13 | 9.3 | DHD340-110 | |
| 115 | 4 1/2" | 2 | 7×φ14 | 6×φ13 | 10.0 | DHD340-115 | |
| 120 | 4 3/4" | 2 | 8×φ14 | 6×φ14 | 11.0 | DHD340-120 | |
| 127 | 5 | 2 | 8×φ14 | 7×φ14 | 12.0 | DHD340-127 | |
Detailed photos:
Application:
