|
[China]
Trade Verify
Address: No55. Jiucaiyuan road, Furong District, Changsha, Hunan,China
Contact name:Ling Bo
Changsha Sollroc Engineering Equipments Co., Ltd |
|
Verified Suppliers
|
|
|
DTH Drilling Hammer 4'' Shank HD45 for Mining, Quarry and Rock Drilling
Product Advantages:
1. The check valve can be replaced to the one with bigger ail controlling hole to provide more efficient cuttings discharge.
2. The top sub and the drive chuck have special thread, which can achieve an easier disassemble
3. Using the latest rock drilling theory, optimizing the inside structure and the size of the air distribution, to make the DTH Hammer obtain the optimal energy transfer and make it achieve faster drilling speed and lower air consumption.
Product description
Sollroc drilling hammer and bits are made of high quality alloy steel with advanced
heat treatment to assure the good drilling performance and long
service life. They are widely used by our customers all over the
world.sollroc drilling makes and supplies the finest and most efficient Down-the-Hole
(DTH) hammers and bits for the mining, construction and water well
industries.
DTH Hammer specification:
HD45 hammer
| shank | HD45 |
| Length(less bit) | 1030mm |
| External diameter | 99mm (optional) |
| Top sub thread | API 2 3/8”REG |
| Weight(less bit) | 39kg |
| Hole range | 110mm-135mm |
| Working pressure | 1.0-2. 5Mpa(145-362.5psi) |
| Impact rate at 1.7Mpa | 27Hz |
| Recommended rotation speed | 25-40rpm |
Face shape Features
Concave face is suitable for all-round rock formation, especially for medium hard and homogeneous rock formations,excellent control over hole deviation.
Convex face is suitable for medium hard rock formation.Non abrasive rock formations. High peneration rate.
Flat face is suitable for hard and abrasive rock formation.High peneration rates and resistance to steel wash.
