Zhengzhou Sincola Machinery Co., Ltd |
|
Introduction:
SH Series hose pump can be fixed.In pump pump shell seat can be adjusted along the axis of 360 degrees, which can change toward water in and out of the mouth.This pump in and out of the water mouth E standard stainless steel or PP plastic quick coupling, the quick connector directly inserted into the u-shaped tube, by a pair of semicircle rectangular shape clamp hoop clamp and fixed in the mouth of water of pass in and out of the pump shell flange. So replace or install hose is very convenient.
The pump casing and pump adopts the aluminum alloy material, and
with move also adopt aluminum alloy outer shell cycloid speed
reducer and motor.The whole machine, light in weight.Is the same
specification pump weight between a third or a quarter.Before and
after the pump seat side at the bottom of the left and right sides
are all in a screw hole and is equipped with four wheels make the
pump can be mobile casually.Structure of the pump rotor has a
variety of ways, one is the rotating disc, wheel near the outside
of uniform has six sink holes, equipped with a precision roller
shaft heat treatment.(can be symmetrical two or three or six
uniform roller shaft) roller can be directly inserted on the roller
shaft, roller is equipped with two needle roller bearing, a thrust
bearing and a fully sealed ball bearings with dust cover.The top of
the roller shaft is equipped with an injection nozzle can be grease
lubrication of roller)
Paremeter:
Pump Model | Output (L/h) | Pressure (MPa) | Hose ID (mm) | Rev. (r/min) | Max. ParticleDia.(mm) | Max. Suct.Left (m) | Motor Power (kW) |
SH10 | 60 | 0.6 | 10 | 45 | 2 | 2 | 0.37 |
SH10B | 100 | 0.6 | 10 | 80 | 2 | 2 | 0.37 |
SH15 | 210 | 0.6 | 15 | 45 | 2 | 2 | 0.55 |
SH15B | 300 | 0.6 | 15 | 75 | 2 | 2 | 0.55 |
SH25 | 800 | 1.5 | 25 | 50 | 3 | 3 | 1.1 |
SH25B | 1300 | 1.5 | 25 | 80 | 3 | 3 | 1.5 |
SH32 | 1300 | 1.5 | 32 | 50 | 3 | 4 | 2.2 |
SH32B | 1800 | 1.5 | 32 | 75 | 3 | 4 | 2.2 |
SH38 | 2000 | 1.5 | 38 | 40 | 5 | 4 | 2.2 |
SH38B | 2700 | 1.5 | 38 | 55 | 5 | 4 | 3 |
SH38C | 3500 | 1.5 | 38 | 70 | 5 | 4 | 4 |
SH50-558 | 4200 | 1.5 | 51 | 35 | 6 | 5 | 4 |
SH50-558B | 5400 | 1.5 | 51 | 45 | 6 | 5 | 5.5 |
SH50-680 | 6300 | 1.5 | 51 | 35 | 6 | 5 | 7.5 |
SH50-680B | 8000 | 1.5 | 51 | 45 | 6 | 5 | 7.5 |
SH65-680 | 9200 | 1.2 | 64 | 40 | 8 | 5 | 7.5 |
SH65-680B | 12000 | 1.5 | 64 | 45 | 8 | 5 | 11 |
SH65-770 | 13500 | 1.2 | 64 | 45 | 8 | 5 | 11 |
SH65-770B | 16500 | 1 | 64 | 55 | 8 | 5 | 11 |
SH76-770 | 18000 | 1 | 76 | 45 | 10 | 5 | 11 |
SH76-770B | 22000 | 1 | 76 | 55 | 10 | 5 | 15 |
SH76-915 | 24000 | 1 | 76 | 50 | 10 | 5 | 15 |
SH76-915B | 28000 | 1 | 76 | 40 | 10 | 5 | 18 |
SH100 | 33500 | 1 | 102 | 35 | 15 | 5 | 18 |
SH100B | 42000 | 0.75 | 102 | 45 | 15 | 5 | 18 |
It can be produced according to the especcial requirement of client. | |||||||
The pump's output is determined with water. |
The electric motor in the above list is 380V50Hz,IP55.
The output of the pumps in the above list is determined against
water.
The client can make request of the technical data of the pump body
and hose.
According to the conveying medium, the squeeze hoses are of
wearable, alkali proof, acidresistant, organic solvent resistant
etc.
The exact overall measurement and weight depends on the exact type
and installation method.
Product application fields:
1. Gold smelting industry: gold pulp and tailings conveying
2. The chemical industry of acid, alkali, phosphate and phosphate
titanium dioxide, titanium dioxide (metatitanic acid) paste, liquid
crystal, suspension, emulsion, resin, mud, and all kinds of
material liquid.
3. The drilling mud in oil industry, oil transportation and
gasoline, kerosene and other organic solvent and transfer of fuel
oil.
4. Water treatment sludge and lime slurry, adding reagent, sampling
water and sediment transport.
5. Mining, metallurgical industry, such as filling material in gold
mining, iron oxide, flue mud processing thick pulp, underground
drainage, adsorbent, mortar and mortar, etc.
6. The pharmaceutical industry in the material liquid drug
delivery.
7. In the food industry and beverage conveying oil material.
8. Pulp in papermaking industry, sulphur pulp conveying.
9. Cement mortar conveying of the construction industry
10. Ceramic raw material slurry transportation industry.
11. Nuclear waste, electrolytic slag, slag metal liquid, paint,
coatings, such as liquid, material conveying.
Industry: 12. Beer yeast, diatomite, lees, syrup, ingredients,
thickening agent (liquid), the mixture of gas and liquid.
13. Other industry application: clean the environmental protection
sewage treatment such as aviation, Marine electrolytic electrolyte
transport industry.
Pictures: