400*250 mm Double Toothed Roll Crusher Small Stone Shredder
Introduction of Stone Crusher:
The roll crusher(roller crusher) can grind hard, medium hard ore
and rock in mine, chemical, cement, refractory, construction
industry, etc. Roll crusher has better effect than common machine
in construction material industry.Roll crusher can also be called
roller crusher. It is composed of two rollers rotating with
opposite direction. Materials go into the space between the two
rollers from the upper part and then will be squeezed and crushed
by the two rollers, and crushed materials will be discharged from
the bottom of the machine. The space between the two crushing
rollers can be flexibly adjusted to produce products with different
fineness.
Working principles of Roller Crusher:
- The main parts of roll crusher are two rollers, one fixed roller
and one movable roller.
- The two rollers are driven by wheels and belts. When the roll
crusher machine works, the movable roller is pushed by the spring
between the body and wheel to rotate forth and back.
- Materials fed by the vibrating feeder fall between the two rollers
and get squeezed and crushed. Qualified particles will through the
teeth on the rollers and are exhausted out.5-10 T/H Mining Ore Double Roller Crusher Machine
Specifications of Double Roll Crusher:
Model | 2PG400×250 |
Roller Diameter (mm) | 400*250 mm |
Max. Inlet Size (mm) | ≤25 |
Discharge Granulator (mm) | 2--8 |
Capacity (t/h) | 5--10 |
Spares for Above Smooth Roller Crusher |
1.Motor 2.Motor Wheel 3.Belt 4. Flywheel 5.Rotor 6.Buffer Spring 7.
Bearing Housing 8.Roller Body |
Rollers | 2 PCs / Set |
Bearing Housing | For Fix Roller |
Product advantages of 5-10 TPH Roller Breaker:
- Large crushing ratio. When a larger crushing ratio is needed, a
crushing stick-shaped device can be equipped under the rollers to
adjust the crushing ratio.
- Simple structure. The modularized frame allows roll crusher to be
installed at your place or to have a grouped installation.
- Low over-crushing rate. Roller crusher machine adopts a combined
crushing mode, not impaction, which avoids a second crushing in the
body.
Service policy:
- Before sales:
- 1.The device type
- 2.For customer training and technical personnel
- 3.According to customer request, design and manufacture products
- 4.The company send engineers and technical person to the user’
site, planning for the optimal design of the flow field, and the
solutions
- Medium sales:
- 1.Acceptance of the product
- 2.Assist client protocol construction scheme
- After sales:
- 1.On site training personnel
- 2.Appoint special after-sale service staff , arrived at the site
and guide clients installation and commission.
- Note:This specification is just for reference, any changes are
subject to the products
For More Details Please do not hesitate to contact us via the
following method: