|
[China]
Trade Verify
Contact name:sam.law
Shenzhen Jichuangyu Intelligent Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
▶▶▶Description:
Helical gearmotors
Make use of the advantages of the compact combination of powerful
helical gear units and AC motors. Our helical gearmotors of the
series R..DR.. set themselves apart with their finely stepped gear
unit ratios and variety.
Covering 6 specifications of single-stage reducers and 14 specifications of 2-stage and 3-stage reducers, the R series of helical gear reduction motors perfectly meet the requirements of power and installation space.
| R series helical gearmotors hard surface reducer ✪●✪ Product size&Technical data | |||||||
| Gear unit size | R17 | R27 | R37 | R47 | R57 | R67 | R77 |
| Motor Power(KW) | 0.09-0.75 | 0.12-3 | 0.12-3 | 0.12-5.5 | 0.12-7.5 | 0.12-7.5 | 0.18-11 |
| gear ratio range | 3.83-81.64 | 3.37-135.09 | 3.41-134.82 | 3.83-176.88 | 4.59-186.89 | 4.29-199.81 | 5.31-195.24 |
| Mamax Gear unit(Nm) | 85 | 130 | 200 | 300 | 450 | 600 | 820 |
| Gear unit size | R87 | R97 | R107 | R127 | R137 | R147 | R167 |
| Motor Power(KW) | 0.25-30 | 0.25-37 | 2.2-45 | 2.2-55 | 5.5-90 | 9.2-90 | 9.2-200 |
| gear ratio range | 5.3-246.54 | 4.5-289.74 | 4.92-251.15 | 5.55-262.65 | 5.15-222.60 | 5.00-163.31 | 10.24-229.71 |
| Mamax Gear unit(Nm) | 1550 | 3000 | 4300 | 6000 | 8000 | 13000 | 18000 |
| Gear unit size | RX57 | RX67 | RX77 | RX87 | RX97 | RX107 | |
| Motor Power(KW) | 0.12-7.5 | 0.12-7.5 | 0.12-15 | 0.25-30 | 0.25-37 | 2.2-45 | |
| gear ratio range | 1.3-5.5 | 1.4-6.07 | 1.42-8.00 | 1.39-8.65 | 1.42-8.23 | 1.44-6.63 | |
| Mamax Gear unit(Nm) | 69 | 134 | 215 | 405 | 595 | 830 | |
▶▶▶Features
RX series (single-stage)
•Highly efficient helical gear units in 6 sizes
•High output speed, up to 830 Nm
•Gear unit ratios up to i = 8.65
•Available in foot or flange-mounted design
R series (multi-stage)
•Optimum ratio between performance and space requirements thanks to
15 sizes
•Finely stepped gear unit ratios up to i = 289.74; or i = 27,001
for double gear units
•Available in foot or flange-mounted design
•Also available with reduced backlash
| Catalog designation | R57DRN80M4BE1HR |
| Product | Helical gearmotors R..DRN.. (IE3) |
| Product data | |
| Rated motor speed [1/min] | 1440 |
| Output speed [1/min] | 30 |
| Overall gear ratio | 48.23 |
| Output torque [Nm] | 235 |
| Service factor SEW-FB | 1.90 |
| Mounting position | M1 |
| Base / top coat | 7031 Blue gray (51370310) |
| Position of connector/terminal box [°] | 0 |
| Cable entry/connector position | X |
| Output shaft [mm] | 35x70 |
| Design type | Foot-mounted design |
| Permitted output overhung load with n=1400 [N] | 6850 |
| Lubricant quantity 1st gear unit [Liter] | 0.8 |
| Motor power [kW] | 0.75 |
| Duration factor | S1-100% |
| Efficiency class | GR3 |
| Efficiency (50/75/100% Pn) [%] | 80.7 / 82.9 / 82.9 |
| CE mark | No |
| Motor voltage [V] | 230/400 |
| Wiring diagram | R13 |
| Frequency [Hz] | 50 |
| Rated current [A] | 3.05 / 1.75 |
| Cos Phi | 0.74 |
| Thermal class | 155(F) |
| Motor protection type | IP55 |
| Design requirement | IEC60034 (without CE) |
| Mass moments of inertia (referring to the input side) [10⁻⁴ kgm²] | 26.20 |
| Weight [kg] | 36.70 |
| Braking torque [Nm] | 10 |
| Brake voltage [V] | 230 |
| Brake control | BG1.5 |
▶▶▶ SEW reducer R series helical gear reducer
Gear transmission efficiency up to 98%, low vibration, low noise
Solid shaft, flange or footing mounting, can be used as the input stage part of the multi-stage reduction box
out speed (rpm): 0.05rpm - 1829rpm
Torque range(Nm)/Power range(KW): 50Nm - 18,000 Nm/ 0.09KW - 160 kW
SIZE:R37,R47,R57,R67,R77,R87,R97,R107,R137,R147,R167
RS37,RS47,RS57,RS67,RS77,RS87,RS97,RS107,RS137,RS147,RS167
RF37,RF47,RF57,RF67,RF77,RF87,RF97,RF107,RF137,RF147,RF167
RX37,RX47,RX57,RX67,RX77,RX87,RX97,RX107
RXF37,RXF47,RXF57,RXF67,RXF77,RXF87,RXF97,RXF107
▶▶▶FAQ
Q: Is it able to customized?
A:yes, we could re-design and produce the gear motor as your
requirements if the quantity is large.
Q: Can you print other colors?
Yes. Customized color can be printed on the gear motor according to
your requirements.
Q: Is that factory price?
Yes. We assure you all prices are based on factory.
Q: What documents are available?
A full range documents including structural drawings, packing list,
installation manual and relative certificates can be provided.
Moreover, customs declaration is provided. We provide one-stop
service for you.
Q: Is it able to customized?
yes, we could re-design and produce the gear motor as your
requirements if the quantity is large
