Active Member
|
[China]
Address: No.680 Tingyi Road, Tinglin Industrial Park, Jinshan District, Shanghai, 201505, China
Contact name:Caroline Wang
Shanghai Beyond Machinery Co., Ltd |
|
|
Small conjunct type CIP cleaning system
Usage:
The system can perform the acid cleaning, alkali cleaning and hot water cleaning separately. And also the system can draw up the special full automatic cleaning program according to the request. It can not only clean all the equipment efficiently, but also limit the growing of the microorganism, meanwhile, we can also deploy the semi-automatic and full automatic controlling system according to the customer’s requirements.
| Model | LTCIP-0.5X3 | LTCIP-0.8X3 | LTCIP-1X3 |
| Outside specification: L × W×H | 3.2×1.4×1.6 | 5×1.8×2 | ≤0.45(T/H) |
| Equipment weigh | ≈550kg | ≈650kg | ≈800kg |
| Basic manually technical parameter | Inner shell:SUS304, δ3mm,outside shell: δ1.5mm,PU insulation material, coil tube to heat, single circuit. whole line bracket material: SUS304; manually controlling, flow rate: 10m3/h, pump lift:32m,power:3KW;Operating plate, Stainless Steel switch board. | ||
| Semi-auto basic technical parameter | Inner shell:SUS304, δ3mm,outside shell: δ1.5mm,PU insulation material, coil tube to heat, single circuit. whole line bracket material: SUS304; manually controlling, flow rate: 10m3/h, pump lift:32m,power:3KW; imported temperature controller system from BURKERT,German. Operating plate, Stainless Steel switch board. | ||
Semi-automatic split type CIP cleaning system
Structure:
The hearing way for the cleaning liquid is auto-heating. The operating principle is to set the cleaning temperature through the temperature controller to control the steam control valve’s opening frequency to limit the steam amount making the cleaning liquid keep at needed temperature. All the tanks liquid level in the CIP system adopts the auto-alarm. It will be increased the concentrated acid and alkali through manually way when the cleaning liquid concentration reduced. The cleaning process transforming should be operated by the manually to change some relevant pipelines and valves. Workers should increase the water when the tank lack of water.
| CIP Tank size | 1000L-10000L | |
| CIP tank type | Alcali tank, acid tank, hot water, clean water tank, water recycle tank | |
| Cleaning recycles | Single circuit, double circuits, three circuits, four circuits | |
| Heating method | Coil pipes inside, plate heat exchanger ,tubular heat exchanger | |
| Automatic types and characters | Semi-automatic |
|
| Tank size | 1000L-10000L | |
| CIP tank type | Alkali tank, acid tank, hot water, clean water tank, water recycle tank | |
| Cleaning recycles | Single circuit, double circuits, three circuits, four circuits | |
| Heating method | Coil pipes inside, plate heating, tubular heating | |
| Automatic types and characters | Full Automatic type | 1.flow rate auto control; 2.temperature auto control; 3.auto compensate the CIP liquid level; 4.auto compensate the liquid concentrate; 5.cleaning liquids auto transfer; 6.auto alarm |
| Semi-automatic type | 1.temperature auto control 2. electrical control with manual operate the other matters. | |
| Manual type | 1.manual operate on the cleaning process | |
