Active Member
|
[China]
Address: #1 Building, Hanyu golden Valley, Jingshi East Road, Jinan City, Shandong province, PRC
Contact name:Liu
Sinotechdrill International Co., Ltd |
|
|
Power and flexible in compact design Epiroc 1000m drilling depth
mineral exploration drill rig
Introduction
The Boyles C5/C5C surface core drilling rig is compact, yet
powerful. Its compact design makes it easy to position and
transport, even by helicopter. During helicopter transport, the rig
is broken down into six main modules and each module is equipped
with lifting points to ensure safe and effective transport. A
sturdy and robust design enables continuous operation in remote
locations and harsh operating environments. All drilling functions
are performed, using the ergonomic and user-friendly control panel
which also displays all the drilling parameters necessary to ensure
productive drilling. The rig is equipped with the Durahead 2-gear
drive rotation unit that provides the necessary torque and rpm
speed ranges for coring, with a drilling depth capacity of 800 m
when drilling N size holes. Despite its small and compact exterior,
even allowing for helicopter transport, the Boyles C5/C5C provides
the torque and RPM necessary for BO–PO size coring, making it the
most powerful rig in its class. Boyles C5/C5C just goes on and on
without interruption, minimizing service requirements. The rig is
designed with safety in mind, minimizing the risk of personal
injury during operation.
The rig can be dvided into seven main modules, the heaviest weight as 1 000 kg (2 200 lbs). Eachmodule is equipped with lifting points to ensure
safe and effective helicopter transportation.
All drilling functions are performed, using the ergonomic and user-friendly control panel which also displays all the drilling parameters necessary to ensure productive drilling.
The Boyles C5C crawler rigs come with a radio remote control, which allows you to tram the rig from a distance providing a safer working environment.
Specifications
| Depth Capacity | |
| B wireline | 1000m |
| N wireline | 800m |
| H wireline | 500m |
| P wireline | 300m |
| Rotation Unit | |
| Max torque | 5,393 Nm |
| Max speed | 1,300 rpm |
| Spindle (inner diameter) | 124 mm (4,9 in) |
| Mast and Feed System | |
| Feed travel | 2.0 m (6,6 ft) |
| Feed speed | Fast and slow with variable control |
| Mast dump | 0.42 m (1,4 ft) |
| Thrust | 59.6 kN (13,390 lb) |
| Pull | 107 kN (24,055 lb) |
| Drilling angle | 45 to 90 degrees |
| Rod pull length | 6.09 m (20 ft) |
| Main hoist | |
| Single line capacity | bare drum 69 kN |
| Line speed | bare drum 39.7 m/min |
| Cable size | 35 m x 16 mm |
| weight | 5000kg |
Features
1. The rig is equipped with safety guards with an interlock
function that perform a controlled stop if the guard is opened.
2. A sturdy mast and feed system ensures minimal vibration,
straight bore holes and optimum lifting capacity. It can drill
effectively from 45 to 90 degree angles.
3. The three-piece, de-mountable mast adds further to the rig’s
excellent mobility.
