22KW Compact Drilling Mud Centrifugal Degasser 300m3/H

Compact And Effective Centrifugal Degasser With 300m3/H Capacity

Details of Aipu APLCQ300 degasser

Aipu centrifugal degasser units exert centrifugal force to the mud, multiplying the force acting on the gas bubbles to increase buoyancy and release. The increase in buoyancy accelerates the bubble- rise velocity. As the bubbles rise toward the surface, they escape the mud and are further broken down by flow turbulence. The freed gas and the gas- free mud are then separately discharged as desired

APLCQ300 degasser units use a centrifugal- force system rather than conventional vacuum or impact systems.The removal of entrained gases, including H2S and corrosive oxygen, from drilling fluids reduces the threat of dangerous and costly blowouts caused by recirculating gas-cut mud They are Easy-to-install, in-tank mounting virtually eliminates the need for rig-floor space The unit is complete with centrifugal cylinder unit, screens, electric motor and mount Provides lowest hp/GPM throughput ratio, generating up to 1,000 to 1,300 GPM (4,164 to 4,921 L/min), depending on operating conditions

Technical parameters of APLCQ300 vertical centrifugal degasser

Aipu Degassers

Application :2nd purification equipment to process drilling fluids while drilling. It gets rid of entrained gas in drilling fluids. Mainly remove small bubbles that a liquid film has enveloped and entrapped

Result: Remove H2S, CO, methane from drilling mud to surface efficiently. Degasser breaks air and gas bubble, gas will flow out of vessel. Degasser will agitate drilling fluid thoroughly

Why client prefer vertical centrifugal degasser?

It's a typical vertical degasser occupies less space. Such degasser is a rather powerful and energy-saving design. From the drive to the filtration
The material of impeller is stainless steel with highly anticorrosion.it's a typical vertical

Configuration at the input bottom it leads to good performance and ability to suit the different working condition

Maximum water flow of 300 cubic meters per hour.

Why Aipu solids control 

We, AIPU focus on the solid control industry over 20 years and we have a professional technical team. Our products are appreciated by clients because of high quality at reasonable cost. AIPU products have served KDC, Burgan, SINOPEC, CNPC, Honghua, Petronas, Pertamina, and so on drilling company and rig manufacturers. I firmly believe that cooperating with us, you'll find that we are different from other suppliers and you don't need to spend energy time to seek other suppliers.