Active Member
|
[China]
Contact name:Miranda
Shaanxi Aipu Solids Control Co., Ltd |
|
|
Well drilling mud mixing pump is the integration of mixing hopper and centrifugal pump. We can set hopper and pump on skid together or separately. Hopper on tank top and pump on tank bottom skid. Considering whole mud system flow rate we can design the dual tandem mixing pump. Some users will request dual mixing hopper pump anyhow, since they will treat one set as spare one.
Model | Capacity(m3/h) | Pressure (Mpa) | Motor (Kw) | Inlet (Inch) | Outlet (Inch) | Weight (Kg) | Dimension L×W×H(mm) |
APSLH150-50 | 272(1200GPM) | 0.25-0.4 | 55(75HP) | 8 | 6 | 1675 | 2200×1840×1100 |
APSLH150-40 | 150(660GPM) | 0.25-0.4 | 37(50HP) | 6 | 6 | 1460 | 2200×1840×1135 |
APSLH150-35 | 90(400GPM) | 0.25-0.4 | 22(30HP) | 5 | 4 | 1167 | 1850×1540×1000 |
Mixing hopper hydraulic consumption should be as little as
possible, otherwise the flow rate may decrease by too much
Distance between Venturi hopper and nozzle should be proper. The
optimal distance should be 32~90mm
Output pressure should be designed properly. If the discharge port
pressure is too high the flow rate of mixing pump will be lower
than expected
The higher pressure at inlet port the higher flow rate of mixing
hopper
The higher hopper mounted the lower mixing capacity
As its structure we also call it as mixing hopper pump or mud
mixing pump. When the drilling fluid need to be mixed or compounded
to change density, viscosity, dehydration we’ll need the bentonite
or barite, also other polymers. When we feed the material directly
into tank there will be big concentration ball or sedimentation.
Especially when there might happen blow out, we need mix large
quantity drilling fluid in short time. However, the mixture or
agitation have to be finished via assistant equipment-jet mud
mixer.
So the mud mixing pump is mainly to weight or configure proper
drilling fluid for whole drilling mud solids control system. The
jet mud mixer can be designed as dual hopper with dual pump, please
contact us for more custom built service confirmation
Mud mixer is a single jet mud mixer combined with 45 Kw (or 55 Kw) sand pump and a jet mud hopper or a double jet mixer of two pumps and two hoppers.
The weighting hopper can be combined with a pump or be used
independently with manifold valves with pump.
Put the drilling fluid materials (bentonites, barite powder) and
the corresponding chemical additives (polymer) into circulating
tank for increasing the total.
APSLH jet mud pump is a unit used together with the solids control system for petroleum drilling and horizontal directional drilling(HDD). The unit includes one sand pump, one venturi mud mixing hopper and one jet mud mixing hopper and pump that are installed in a base with pipe valves. It is safe and stable and can be moved conveniently. At the same time,we can make Twin-Hopper Unit with two pumps according to the user requirements.It is designed by AIPU solids control bentonite mud mixer,drilling mud tank jet mixer.
The jet mud mixer can be widely used in drilling mud system. Including the oil and gas drilling, the HDD mud recycling, the civil construction drilling mud process. As we know, during drilling there is mud lost and to maintain the mud property we need such equipment to prepare sufficient quality fluids
Besides the APSLH150-50, there are other models jet mixing pump. The difference including pump size, motor power, and the hopper size, the pipe line and fittings
Furthermore, we also provide different configuration on hopper, pipe and pump connection.
The mature design and excellent performance. Powerful agitation and mixing during whole mud system criculation. Reliable performance and durable quality costs less on operation and maintenance. Flexible on configuration of pump and hopper. Cost effective solution for various users.
Mud mixer is a single jet mud mixer combined with 45 Kw (or 55 Kw) sand pump and a jet mud hopper or a double jet mixer of two pumps and two hoppers.
The weighting hopper can be combined with a pump or be used
independently with manifold valves with pump.
Put the drilling fluid materials (bentonites, barite powder) and
the corresponding chemical additives (polymer) into circulating
tank for increasing the total.
