Shaanxi Aipu Solids Control Co., Ltd |
1. There is a drill pit at each side of drilling hole, a set of
vertical slurry pump will set on top of mud pit for feeding shale
shaker. The shale shaker screen will separate drilling cuttings and
discharge out, fluids part will drop into sand trap through screen
hole.
2. 1 or 2 or 3 sets of desander cyclone sit after shale shaker, one
set of centrifugal pump will feed desander cyclong for second phase
separation, solids out of desander will be discharge to shaker
screen or cutting box directly and fluids over flow from desander
will flow into desander compartment.
3. A quantity of desilter cyclones will sit after desander for fine
solids separation, solids out of desilter will discharge to shaker
screen or cuttings box, fluids over from desilter will drop into
desilter compartment.
4. A mixing pump sit on tank skid for drilling mud transfer and
feed mud into mud hopper for new mud remix by new chemicals. The
mixing hopper can sit on top of tank or tank skid as per client’s
demand.
AIPU solids control focus on the solid control industry over 18
years and we have a professional technical team. And I firmly
believe that cooperating with us, you'll find that we are different
from other suppliers and you don't need to spend energy time to
seek other suppliers
As a professional manufacturer of oilfield solids control equipment, AIPU products are appreciated by clients because of high quality at reasonable cost.Trust AIPU solids control will be your strong assistance. Our solutions for you and clients will be the optimal one and lead more reasonable profits. AIPU products have served KDC, Burgan, SINOPEC, CNPC, Honghua, Petronas, Pertamina, and so on drilling company and rig manufacturers.
Model | Capacity | Screen area | Tank Volume | Power |
APMS50 | 50 m3/h | 2.7 m2 | 5.5 m3 | 25Kw |
APMS80 | 80 m3/h | 4.5 m2 | 10 m3 | 55Kw |
APMC120 | 120 m3/h | 5.2 m2 | 15 m3 | 125Kw |
APMC240 | 240 m3/h | 7.8 m2 | 30 m3 | 185Kw |
500GPM HDD mud recycling system is well used for horizontal
directional drilling as well as mining industry with different
electrical standard. AIPU is one of the leading supplier in China
with different standard for drilling industry to suit client
requirement. The whole system can be customized with different size
mud tank, tank compartment arrangement, pipeline and valve layout,
pump layout, etc. The tank is made by H beam, steel plate, square
pipe, grating on top, handrail and ladder, etc.
1. 1 set linear motion shale shaker with 500GPM capacity, 1 set mud
cleaner with 1 set shaker and desander desilter cyclones installed
on second set shaker.
2. 2 sets centrifugal pump installed on tank skid for desander and
desilter mud feeding.
3. 1 set mud agitator on third tank compartment to stop solids
build up in tank bottom and corner.
4. 1 set mud tank 9 meters long to install all equipments on.
5. Pipeline arrangement, stairway, handrail, butterfly valves for
mud tank arrangement.
1. 1 set 500GPM linear motion shale shaker with 3 deck screens
installed on shaker deck. The shaker installed on tank by 4 bolts
for fast moving and installation.
2. 2 sets of vibrator motors for shaker deck to reach linear motion
vibrating. The 2 sets motor will balance force on horizontal
direction on the shaker width direction.
3. Shaker deck is heat treated to allow high G force vibrating with
high strength material Q345.
4. Shaker deck angle can be adjust -1 to +5 degree by mechanical
adjust. Electrical adjust can be optional by extra request on
technical.
5. Shaker screen is frame type design with wedge installation into
shaker deck. The screen can be steel frame or composite material
frame depending on shaker model selection.
Mud reclaiming recycling mixing system is designed for mud
recycling of trenchless. Such as tunneling shield, HDD, and
pilings. It can help reduce costs and improve construction
efficiency significantly.
The whole system consists of a mud recovery treatment unit and a
mud preparation unit.
Before construction, using mud mixing device to blend freshwater
with mud material, achieving the purpose of mud preparation;
Using a mud pump to supply the prepared slurry to the wellhead;
Return of waste mud from the wellhead is pumped to the shale shaker
in the mud treatment unit, and the waste mud is removed through the
mud shale shaker to remove a large amount of the waste solid
particles. The treated slurry liquid will continue to be supplied
to mud cleaner through the sand pump, after treatment the liquid
can meet user requirements. Because after this system treated,
solid particles content in the slurry liquid is 75 microns.
Circulating mud for better economic efficiency.
Reduce environmental impact.
Effectively mud process.
Economical configuration.
Easy operation and maintenance.
Stable and reliable operation.
Flexible proposal.