Fluids Treatment Drilling Mud Cleaner 500GPM For Onshore Platform

Drilling Fluids Treatment Mud Cleaner Hunter 120 500GPM

AIPU solids control supply complete sets of drilling fluids/mud treatment equipment including the mud cleaner. AIPU mud cleaner Hunter 120 is widely used and order repeatedly by drilling contractors and oilfield service companies. As it's compact design compared to mud desander and mud desilter.

Mud cleaner Hunter 120 is composed of 8pcs of 4" desilter cone and 1pcs of 10" desander cone. Treating capacity up to 500 GPM. Sometimes, the mud cleaner is added with a splash board against customer special requirements. And for some clients, they prefer flexible capacity adjustment during operation so we'll install ball valves on the cones inlet line.

For mud cleaner Hunter 120, the bottom shaker is AIPU Hunter-MG3 shale shaker. The shaker with screen panel 3 pieces and the screening is 2.04 square meters. Shaker screen we have composite frame and steel frame for choice. 

Hunter 120 mud cleaner specification

Mud cleaner spare parts

To know the mud cleaner parts well, we need to understand cleaner construction and main parts. Such as the desander cone, desilter cone, the bottom shaker, pipelines, pressure gauge. For the cones, there are hydrocyclone, coupling, drop in Apex, seal rubber, and so on

The bottom shaker, it is same as common shale shaker. Including the shaker basket, the shaker screen, the spring, the side rubber, channel protector, vibrator motor, the starter, and so on

How does drilling mud cleaner work?

Drilling mud is transferred to cones by a centrifugal pump from the shaker tank. Desander cone and desilter cone are fed by different pumps. This will provide better results. Under pump pressure, the fluids will run into cones and flow with centrifugal force. Then the heavy particles will deposit down and pushed out of cone drop in Apex.

After the mud cleaner processing, the solids larger than 15 microns will be separated out of drilling fluids. The drilling mud with solids sprays out of cones drop down to the bottom screen panel. Under vibration and filtration, the solids will be drier and save many fluids for a good drilling. The cleaned mud is transferred to centrifuge.

Why select AIPU mud cleaner

AIPU is professional manufacturer on complete line solids control equipment. All wearing parts are high quality and universality assured. For the cones, all of them are made of high quality polyurethane. Fit with the Victaulic coupling.

Furthermore, AIPU is able to provide the interchangeable mud cleaner spare parts for other makes cleaner. The shaker screen produced by AIPU is API RP13C compliant. Our products and spare parts are highly appreciated by many clients

AIPU solids control always hold popular spare parts in stock for instant delivery. Cater for clients urgency, we promise 48 hours delivery to avoid any operation delay. We consider clients’ urgency so we get the preference so long time

For more information, please don't hesitate to contact AIPU solids control. You will get an optimal solution on mud conditioner or any other demand.