Home Companies Shaanxi Aipu Solids Control Co., Ltd

API Drilling Mud 12 Inch Desanding Hydrocyclone 240m3/H

Shaanxi Aipu Solids Control Co., Ltd
Active Member

Contact Us

[China] country

Contact name:Miranda

Inquir Now

Shaanxi Aipu Solids Control Co., Ltd

API Drilling Mud 12 Inch Desanding Hydrocyclone 240m3/H

Country/Region china
InquireNow

Product Details

Desander API Drilling Mud Process 6- 12 Inch Polyurethane Hydrocyclone Customized

 

Drilling fluids desander information

 

Drilling fluids desander for different mud systems. Which is the 2nd phase solids control equipment in the whole mud system. But for different mud systems, the desander configuration varies from each other.

 

Drilling fluids desander technical parameters

ModelAPCS120/240/360APCS120/240-MAPCS240/360-D3APCS240/360-MG4
Capacity (m³/h)120/240/360120/240240/360240/360
Desander Cone10"
Cone Qty1 Pcs/2 Pcs/3 Pcs
Working Pressure0.25-0.4Mpa
Separation Point47-76 Microns
Inlet6"
Outlet8"
Bottom ShakerModelN/AHunter MiniHunter D3Hunter MG4
Vibration ModeLinear Motion
Vibrator Motor2×0.75Kw2×1.72Kw2×1.72Kw
G Force≤7.5G
Deck Angle-1 - +5°
Screen Area1.35㎡2.27㎡2.73㎡
Screen Panel2 Pcs3 Pcs4 Pcs
Dimension
(mm)
2150×1000×19001680×1760×18502400×2000×22002640×2100×2200
Weight
(Kg)
450/500/5501050/1140kg1800/18901900/1990
 

 

The desanders cone are sized from 6″ to 12″ for the drilling mud process. The most popular one is 10″. And cones are made of high-quality polyurethane since the high ability to resist abrasion. According to different flow rate demands, the desander will be configured with different numbers of cones.

The drilling fluids are pumped from the shaker tank by a centrifugal pump. Under the pressure and gravity effect, there will be a swirl in a cone. Then the centrifugal force pushes heavier material down to cone drop in Apex and light fluids flow out of the discharge line upside.

 

Main Features of Our Drilling Desander

 

Pure polyurethane or high-chromium for hydrocyclones.
Clamp connection for hydrocyclones installation, easy to dismantle and replace.
Replaceable hydrocyclones.
Internation brand vibrating motor, Martin or Oli Motor.
Compact design with a small footprint.
Flexible options for 1, 2, or 3 pieces of 10" or 12" cones for different capacities.
Flexible fast connections are available for user assembly.

 

How many different desander for drilling mud systems?

 

Besides oil drilling mud desander, there is desander used in the mud recycling systems. Such as HDD or piling, slurry separation or tunneling, and so on

 

Different use will request different size cones. Such as for piling, they may request a 14″ or larger cone. For HDD, especially for the smaller rigs, the system may request 6” or just desilter instead of desander

 

And even for the same use, there will be different configurations according to capacity. For example, ZJ40 may request a mud system circulation rate of around 200m³/h, while ZJ70 may request 360m³/h. So, the shakers, drilling fluids desander and other equipment holding the same flow rate will be configured in the system accordingly

 

Mud desander options


1. 3 in 1 option: shale shaker, desander cyclone, and desilter cyclone make the whole equipment to be a 3 in 1. Desander cyclone works to separate solids 47-76 micron solids and desilter cyclone works to separate solids 15-25 micron solids. The separated solids will drop onto shale shaker screen which set on bottom to dry solids product by recycle drilling fluids back into mud tank. The 3 in 1 option is a popular option to minim footprint and maximize its performance result.


2. 2 in 1 option: shale shaker with desander cyclone make a whole 2 in 1 equipment only to separate solids 47-76 micron solids out and bottom shaker to dry solids discharge to minimum drilling fluids lost. This option will maximize its performance application by a big shale shaker but maximize its footprint too. Some clients will choose a mini shaker to make this option cost-effective.


3. Desander cyclone only to a minimum its cost, the solids separated from desander cyclone will be discharged directly by a collection hopper which will make more drilling fluids lost.


4. It’s hart to say which option is better only on specification, it will be depends on drilling condition, drilling mud requirement, budget requirement, etc. The most suitable option is the best option for clients.


Please check the above technical specifications for your reference. And some configuration is customizable. For any questions or demands, just feel free to contact AIPU solids. You will get a professional proposal very soon.

 

 

 

Hot Products

High efficiency drilling fluids desilter with longer using life Aipu drilling fluids introduction ...
Polyurethane Hydraulic Drilling Mud Desander High Performance Cyclone Desander For Mud Circulating ...
Third Phase Large Volumes Drilling Fluids Desilter WIth High Performance Can Hand 320m³/h Capacity ...
EAC Certificated Low Temperature Resistant Steel Drilling Mud Cleaner Mud cleaner uses a two-stage ...
Desander API Drilling Mud Process 6- 12 Inch Polyurethane Hydrocyclone Customized Drilling fluids ...
High Flow Rate Handling Hydracyclones Type Drilling Mud Cleaner Hunter 120 Mud cleaner Hunter 120 is ...