|
[China]
Trade Verify
Address: No.10 West of North Second Rig, Weiyang District, Xi’an City, China
Contact name:Sunny Lee
Xi'an TianRui Petroleum Machinery Equipment Co., Ltd. |
|
Verified Suppliers
|
|
|
Solid Transfer Pump/Drilling Cuttings Transfer Pump
Product introduction:
Pneumatic vacuum transfer pump is a kind of pneumatic vacuum
transfer pump with high load and strong suction, also known as
solid transfer pump or drilling cuttings transfer pump. Capable of
pumping solids, powders, liquids, and solid-liquid mixtures. The
depth of pumping water is 8 meters, and the lift of discharged
water is 80 meters. Its unique structural design enables it to
operate in the most difficult environment with low maintenance
rate. It can transport materials with more than 80% solid phase and
high specific gravity at high speed. It has the following
characteristics: the high-efficiency venturi device can generate up
to 25 inches Hg (mercury) vacuum under strong air flow to suck
materials, and then transport them through positive pressure, with
almost no wear parts. It is commonly used for transportation of
drilling cuttings, oily sludge, tank cleaning, long-distance
transportation of waste suction, and transportation of minerals and
wastes. The vacuum pump is a 100% aerodynamic and intrinsically
safe pneumatic transportation solution, capable of conveying solids
with a maximum inlet diameter of 80%. The unique patented venturi
design creates a strong vacuum and high airflow, which can recover
up to 25 meters (82 feet) of material and discharge up to 1000
meters (3280 feet). Because there is no internal working principle
and no rotating vulnerable parts, it provides a very cost-effective
solution for controlling the recovery and transfer of materials
that are considered non pumpable.
Technical parameters:
| Model | TRSP-80L | TRSP-40L | TRSP-25W | TRSP-20L | TRSP-10L |
| Maximum conveying capacity | 80m³/h | 40m³/h | 25m³/h | 20m³/h | 10m³/h |
| Feed and discharge diameter | 4 "DN100 | 4 "DN100 | 3"DN80 | 3"DN80 | 3"DN80 |
| Suction distance | ≤50m | ≤50m | ≤50m | ≤50m | ≤50m |
| Discharge distance | ≤1000m | ≤1000m | ≤550m | ≤550m | ≤550m |
| Walking form | fixed | fixed | move | move | move |
| Control form | Hand self integration | Hand self integration | automatic | Hand self integration | automatic |
| Overflow diameter | ≤70mm | ≤70mm | ≤50mm | ≤50mm | ≤50mm |
| Pressure | 650-800Kpa | 650-800Kpa | 550-700Kpa | 550-700Kpa | 550-700Kpa |
| Air supply | 13m³/min | 13m³/min | 6.5m³/min | 6.5m³/min | 5.2m³/min |
| Size | 3200*1500*2000mm | 1600*1500*2000mm | 2000*1000*1100mm | 1000*800*1400mm | 900*800*1400mm |
| Weight | 1500kg | 910kg | 300kg | 270kg | 230kg |
| Applicable materials | High viscosity material / powder solid material / | ||||
| Vacuum | 25inch HG/85Kpa | ||||
| Valve | Made in Germany | ||||
| Air control | Made in Japan, control and operation shall be oper | ||||
| Enclosure | ||||
| Name | Model | Parameters | Quantity | Factory configuration |
| Suction hand arm | Stainless steel | 1 | Standard configuration | |
| Strong clamp at suction port | 3/4 | Steel | 2 | Standard configuration |
| Slurry suction pipeline | 3/4 | 10m | 1 | Standard configuration |
| Quick connection of suction port | F,C | Stainless steel | 1 | Standard configuration |
| Quick connection of slurry outlet | A,C | Stainless steel | 1 | Standard configuration |
| Pneumatic control system | -- | -- | 1 | Standard configuration |
| Gas oil-water separator | -- | Duplex | 1 | Standard configuration |
| Discharge arm of slurry outlet | JZXLB-01 | Rotatable rigid tube | 1 | Optional |
| Slurry discharge pipeline | 3/4 | 30m | 1 | Optional |
| Air compressor and air storage tank | -- | -- | 1 | Optional |
| Air pipe | DN25/40 | 15m | 1 | Optional |
Technical features:
*The pump can be operated by one person on duty;
*Super vacuum can absorb materials at 50m;
*All flow-through parts of the pump body are almost free of wear;
*Super large suction can absorb materials with a diameter of more
than 7cm;
*Compressed air can be supplied centrally and transported remotely;
*Ultra long distance transportation, which can realize ultra long
distance of over 1000m;
*The pump can operate indefinitely for a long time without limit;
*High applicability to materials: powder, thinner, viscous
material, sewage, oil stain, etc;
*Full pneumatic control has the ability of fire prevention,
explosion-proof and moisture-proof, and can be used in
high-temperature occasions;
*The pump is controlled by manual, automatic and remote control to
meet more use scenarios;
*Pneumatic control has high reliability and long service life. The
effective action times of electrical components are about one
million times, and the *Service life of solenoid valves is more
than 200 million times;
Applicable material category:
*Drilling waste mud and drilling cuttings discharged from vibrating
screen;
*Jam, peanut butter, tomato sauce, pickled vegetables;
*Metal mine, coal mine slurry and tail slurry;
*Material transportation of bulk tanks and silos;
*Chemical and pharmaceutical particle powder transportation;
*HDD / TBM urban construction sludge;
*Desilting of sedimentation tank and soaking tank;
*Recycling of toxic and hazardous wastes;
*Tank sludge and bottom slag removal;
*Sand, fine sand and fracturing sand;
*Large scale dredging of municipal pipelines;
*Bilge cleaning of transport ship;
*Livestock and poultry feces;
