Active Member
|
[China]
Contact name:Emily
Kondasin International Co.,Ltd. |
|
|
Construciton Machine Anchor Drilling Rig Large Torque Long Stroke Skid Mounted
1. This drilling rig is a full hydraulic power head drill,is designed on steep slopes,this allow drilling rig can be carried out with low machine weight and dangerous site .It can be used for deep base pit of high building, anchor and reinforce side-slope for water conservatory project, water power station project, railways and highways,specially used in high position side-slope protection and drainage holes.It also used to prevent or solve geologic calamity, such as landslide and rock collapse etc. In addition, it is also used to drill small size water well and high- pressure jet grouting hole.
2. The rig is divided into three parts:main frame,power station and control station,the operator can operate the machine far from hole so will be work in a better environment.
3. It has great drilling capability, wide range of application , rapid drilling speed and high drilling efficiency, as well as powerful ability of eliminating accident.
3. When the work environment is small,can choose the mast with 1.2 meters.
| drilling depth | 60-70 (m) |
| Drilling diameter | ¢ 110- ¢ 180 (mm) |
| drill diameter | ¢ 73 × 1500, ¢ 89 × 1500 (mm) |
| Drilling dip | 0 ~ 120 ° |
| power head output speed (forward and reverse) | 5-130rpm |
| Rated output torque of the power head | 2500NM |
| Power head stroke | 1800 mm |
| mast slip stroke | 500 mm |
| power head maximum pull force | 45KN |
| Power Head biggest feeding force | 30KN |
| hydraulic system rated pressure | 18Mpa |
| Motor Type Y180L-4 Power | 22KW |
| Host layman size | 3100 × 1000 × 1500 (mm) |
| Rig weight | 1300Kg |
| maximum part weight (excluding motor) | 200Kg |
1. It has great drilling capability, wide range of application , rapid drilling speed and high drilling efficiency, as well as powerful ability of eliminating accident.
2. Mast can be fixed on staging immediately without drill frame with auxiliary parts, which makes it possible for reduce rig weight and fastener transport.
3. A set of front-mounted adjustable columns on drill frame is used for adjusting the height of mast front-end, which makes it convenient to align with working position.
4. This rig can accomplish jet grouting construction site through module replacement.
5. The rig has a wide scope of angle from elevation 10° to depression 90°,the slide frame can slide and move easily.
6. Hydraulic part is an international famous brand product which ensures drilling rig's high stable and permanence stability.
7. It can be used with various drilling method such as carbide bit drilling, anger drilling, DTH hammer drilling, follow-up casing drilling etc.
