Active Member
|
[China]
Contact name:Emily
Kondasin International Co.,Ltd. |
|
|
Engineering Rig Anchor Drilling Rig Yanmar Diesel Engine Bigger Power Low Weight
1. This anchor drilling Ak30 is especially designed to use on steep slopes and embankments,because of the low weight it can be carried out in difficult and dangerous on site conditions.
2. This rig is used for large tonnage pre-stressed bolting holes of hydropower project and road slope as well as drainage holes construction.
It is also available for geological disaster management
project and rock anchor engineering.
3. It is composed of main set, control panel and pump which are
connected together with flexible joint. So it features simple in
structure, good disassembility and convenient to mount and
transport.
4. The rig matched with diesel engine so it convenient for the place without electric.
| Hole depth | 30-40m |
| Hole Diameter | Φ80-130 mm4. |
| Output speed of power head | 24 -114 r/min |
| Power Head Output Torque | 1500 Nm |
| Hole angle range | 0-360° |
| Power Head Feeding Stroke | 1800 mm |
| Max. Power Head Lifting Capability | 30kN |
| Max. Power Head Thrust Force | 15kN |
| Mast Sliding Compensating Stroke | 500 mm |
| Drill rod specification | Ø50×1500 mm Ø73×1500 mm |
| Overall dimension(transport state)(mm | 2.95*1*1.35m |
| Yanmar Diesel Engine (kW) | 26 |
| Weight (kg) | 1896 (3 parts) |
1. The power head has large torque,long stoke and high working efficiency.
2. Operating drill through the centralized control panel ensures assure safety operation and on-site cleanliness.
3. Rig structure is separate group design:main frame,pump station and control station, it assures good disassembling, rapid and convenient mount and transport, best working environment and lower labor strength.
4. Transmission has two speed range high and low. It can meet the requirements of both DTH hammer drilling and carbide bit drilling.
5. The power head has large torque,long stoke and high working efficiency.
6. Hydraulic part is an international famous brand product which ensures drilling rig's high stable and permanence stability.
This rig is used for large tonnage pre-stressed bolting holes of hydropower project and road slope as well as drainage holes construction.
It is also available for geological disaster management project and rock anchor engineering.
